LeonBryant Posted February 12, 2016 Share Posted February 12, 2016 I replaced crossovers in Forte IIs and wonder if phase of woofer matters? Quote Link to comment Share on other sites More sharing options...
Chris A Posted February 12, 2016 Share Posted February 12, 2016 Yes...it does. You'll get a deep frequency response null at the crossover frequency to your midrange if you get it wrong. Chris Quote Link to comment Share on other sites More sharing options...
Mr._Music_Fan Posted February 13, 2016 Share Posted February 13, 2016 Howdy Forte II comrade! What did you replace the crossovers with? Quote Link to comment Share on other sites More sharing options...
LeonBryant Posted February 13, 2016 Author Share Posted February 13, 2016 Crites! And also put titanium diaphragms in tweeters. Quote Link to comment Share on other sites More sharing options...
LeonBryant Posted February 13, 2016 Author Share Posted February 13, 2016 I will reverse polarity and listen for a difference. Thanks!!! Quote Link to comment Share on other sites More sharing options...
Mr._Music_Fan Posted February 13, 2016 Share Posted February 13, 2016 Oh ok, do you notice any difference in sound staging/imaging, or tonal qualities? Quote Link to comment Share on other sites More sharing options...
Mr._Music_Fan Posted February 13, 2016 Share Posted February 13, 2016 Any update? Quote Link to comment Share on other sites More sharing options...
LeonBryant Posted February 13, 2016 Author Share Posted February 13, 2016 Plan to do this tonight. I'll let you know the results! Quote Link to comment Share on other sites More sharing options...
Krispy Kirk Posted February 15, 2016 Share Posted February 15, 2016 I put Crites crossovers in my 1989 Forte IIs last year (I updated my tweeter diaphragms circa 2005). At first I was hard-pressed to quantify the sonic differences beyond one word: "louder". I'd guess I recovered a few decibels of efficiency (this is an off-the-cuff estimate since I was too lazy to find my SPL meter to confirm). But then I just forgot about them and listened... After a few weeks it hit me that my speakers didn't seem so finicky about source material, changes in amplification, cabling choices, or even location in my listening room (I move and switch stuff around constantly) as they had before. My Forte II's now seemed more "solid" which made my whole system seem more consistent with less day-to-day and hour-to-hour variation in sound quality. I found myself leaving my listening room in frustration less and less and staying in it playing music for longer stretches. This is not at all what I expected and is a very pleasant surprise. I was hoping for more and better bass, improved imaging, and smoother more "open" treble. I suppose I got some of this but not enough to blow me out of the room. Instead, my already awesome speakers just got better at being what they are: the easiest to live with and biggest bang-for-the-buck speakers in the entire Heritage line up. It was $260 well spent! Quote Link to comment Share on other sites More sharing options...
Deang Posted February 15, 2016 Share Posted February 15, 2016 Get a flashlight. Put the light on the back of the driver. One side will have a "factory mark" - an 'X' or '/' made with a magic marker (either red or black). The side with the mark is positive. Connect the positive wire from the crossover for the woofer to the side with the factory mark. 1 Quote Link to comment Share on other sites More sharing options...
LeonBryant Posted March 1, 2016 Author Share Posted March 1, 2016 Thanks, everyone! So, I finally opened them them up again, and the woofer is wired from the Crites crossover with red wire to the + mark so that seems correct, Deang. i reversed the wires on the mid horn, but did not seem to make a difference. My room undoubtedly has an effect on bottom end distribution as it is a bit narrow.with a couch several feet from the speakers, which are against a rear wall. One consideration might be replacing the woofers. I am sure they are the originals and these speakers have been been well used by two owners before me. They were made in 1976. Thoughts on replacing the woofers? Finally, I must saythat these are indeed the most amazing stereo speakers I have ever owned. I am definitely splitting hairs here! Quote Link to comment Share on other sites More sharing options...
Chris A Posted March 4, 2016 Share Posted March 4, 2016 I reversed the wires on the mid horn, but did not seem to make a difference....One consideration might be replacing the woofers. I am sure they are the originals and these speakers have been been well used by two owners before me. They were made in 1976. Thoughts on replacing the woofers? Unless you have some sound quality issues, I'd recommend keeping your present woofers. One way to hear any issues in the crossover phasing is to run a fairly slow upsweep through one Forte at a time, noting the point at which you get to 600 Hz (the "C" an octave above middle "C", i.e., above the tuning-fork frequency of A440). If you hear a disturbance, then reverse the leads on the woofer and try again, listening for the same disturbance. If you don't have REW or True RTA installed to do the upsweep, then you can use something like this. Chris Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.