Shardin Posted April 23, 2016 Share Posted April 23, 2016 Hi New to forum, I want to replace my Dayton Audio Channel speaker and I am thinking of putting 2 S-10's on either side of a 65" flat screen as the C-channel speaker, I am using four S-10;s as surround on a Dennon 7.1 system with Advent Heritage towers as the front L-R speakers. Any comments? Quote Link to comment Share on other sites More sharing options...
mustang guy Posted April 23, 2016 Share Posted April 23, 2016 Hi New to forum, I want to replace my Dayton Audio Channel speaker and I am thinking of putting 2 S-10's on either side of a 65" flat screen as the C-channel speaker, I am using four S-10;s as surround on a Dennon 7.1 system with Advent Heritage towers as the front L-R speakers. Any comments? Surround speakers flanking the TV screen as a center channel sounds interesting, but it has some problems. First of all bi-pole speakers are designed to disperse sound and not be directional. The center channel needs to be directional. The second problem is timbre matching of the left/center/right speakers is _the_ most important thing. For a center, you would be best to have another Advent Heritage. Do you have a picture of your setup? Quote Link to comment Share on other sites More sharing options...
Shardin Posted April 23, 2016 Author Share Posted April 23, 2016 Thanks Mustang Guy, I had not considered the directional issue with the speakers. Quote Link to comment Share on other sites More sharing options...
mustang guy Posted April 23, 2016 Share Posted April 23, 2016 No problem. If you can get your hands on another speaker like your mains and lay it down, you will get better timbre matching. If you can stand it up, it would be even better. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.