PRO-7800-L-THX typical mount

[Jeco92]

Hello all,

 

I live in France and use Klipsch speakers for a long time, more than 20 years starting with first THX small system (It still used by one of my son).

In my homecinema room, I have :

 

- Palladium P37 for right and left

- Palladium P27C for center

- Palladium P27S for surrounds

- R-15M for rears

 

I will update my room by adding 4 dolby Atmos speakers.

 

As my ceiling is not flat (it is like wave), I cannot install classic klipsch thx speakers like PRO-7502-L (due to 20° angle direction of sound with this speaker).

So I plan to use PRO-7800-L-THX or PRO-6502-L-THX instead. I can install these two ones with a good orientation for listening.

 

My preference is PRO-7800-L-THX but I cannot install it vertically as shown on klipsch web site.

 

So my questions are :

 

- can I install the PRO-7800-L-THX horizontally with woofer on right on on left side (depending on ceiling location, med/tweeter always near center) ?

- do I need to modify it in anyway like turning 90° left or right the med/tweeter ?

 

If PRO-7800-L-THX cannot be used in my case, I will use the PRO-6502-L-THX which can be installed horizontally.

 

Hope you can help me on this.

 

Best regards from France.