Jump to content
The Klipsch Audio Community
Sign in to follow this  
jdlanctot

I have a Klipsch MCM 1900 4-way system with a noteworthy history for sale

Recommended Posts

I've checked before, I can't get the double bass bins into the basement.

Good luck with your sale.

  • Like 2

Share this post


Link to post
Share on other sites

Yes, they are available. I haven't been very aggressive in trying to sell them; I'm sure you can understand why. ;)   Let me know if interested.

Share this post


Link to post
Share on other sites
4 hours ago, opusk2k9 said:

I've checked before, I can't get the double bass bins into the basement.

Good luck with your sale.

You're not trying hard enough

 

:P

  • Like 1

Share this post


Link to post
Share on other sites
Just now, Woofers and Tweeters said:

You're not trying hard enough

 

:P

Short of excavation or installing a freight elevator, I would need the single height bass bins.

The single height would be difficult enough, but might be worth the effort.

  • Like 1

Share this post


Link to post
Share on other sites
10 minutes ago, opusk2k9 said:

Short of excavation or installing a freight elevator, I would need the single height bass bins.

The single height would be difficult enough, but might be worth the effort.

Trust me , They ARE worth the effort :D 

Share this post


Link to post
Share on other sites
4 minutes ago, Gnote said:

Trust me , They ARE worth the effort :D 

 

Exactly what I was going to say.  And that's only from what I've read about from you folks. 

  • Like 1

Share this post


Link to post
Share on other sites

Elliott, is there a chance these are coming to Massachusetts? I noticed you have a Massachusetts area code. If so, I may need to visit. B)

  • Like 2

Share this post


Link to post
Share on other sites

hi Jim, 

 

I know this is an old post, but still have your MCM subwoofers on sale?

please contact me at djcompany@me.com

 

regards

Share this post


Link to post
Share on other sites

Are these still available? I am about to be putting in a bid to redo the sound system for a 1600 person theater at a local university where they would love these...

Share this post


Link to post
Share on other sites
On 11/12/2016 at 3:17 PM, jdlanctot said:

Hi All,

 

**This is a re-post from January with several updates.

 

I have an MCM 4-way system with a noteworthy background and in very nice condition that’s looking for a new home.

 

This set was originally built in August, 1984 and used as the house “mains” in the 1180-seat Performance Hall at Lincoln Center (pictured) in Fort Collins, CO – a premier concert venue that played host to literally dozens of national/international musicians and Broadway shows while this system was in service (I have a fairly good list of artists and play dates drawn from local archives and the historical society). These speakers have carried the voices and music of many names you’d recognize, including Willie Nelson (1999), Nickel Creek (2006), Tracy Chapman (1995), Michael McDonald (1994), Ray Charles (2002), Manhattan Transfer (1992, 2009), Charlie Daniels (1986), The Beach Boys (2000), Wynton Marsalis (1992, 2008), B.B. King (2003), The Indigo Girls (2010), Ricky Lee Jones (2009), and Lyle Lovett (2007), to name just a few. Hank Williams’ daughter Jett played there (1993) in a unique appearance with a rendition of Hank’s Drifting Cowboys Band.

LincolnCenter2.JPG


The system was removed from Lincoln Center as part of a major renovation to the building in 2010, in which the architecture and acoustics of the Performance Hall were significantly updated. They made their way into the hands of a local church where they were used as part of a portable system for a period of time, taking a number of dings and scratches along the way. I purchased them at the end of 2013 from a gentleman in nearby Loveland who was using them as part of his home theater system and was preparing to move to a smaller residence.


Over the last two-plus years, I’ve spent time giving them a refresh. In addition to the cabinet bumps and bruises, one of the K-43s was missing, one of the K-55s was inoperable (no obvious reason why), and several modifications had been made for portable use – Neutrik Speak-On connectors were added to the input panels, some of the fuses were bypassed, and the MWM input panels were recessed so they’re flush with the surface of the cabinets.

IMG_1923.JPG

 

I’ve taken care of the driver & other electrical issues and the system sounds absolutely amazing. There’s no evidence it has ever been pushed to its limits. I turned it up in a 50 x 80 foot room with a 9-foot ceiling (200W/channel Soundcraft amp), and it actually started snowing tiny pieces of ceiling tile all across the room. I’ve also spent significant hours on the cabinets, replacing/updating hardware, fixing the more significant cosmetic issues, and painting them with Duratex paint from Acrytech (3 coats on the exterior surfaces). Having worked with Klipsch MCMs professionally in the past and having also spent some time rubbing elbows with engineers at the Klipsch facilities shortly before these were built, I couldn't pass up this project. I’m now looking to find them a new home since I don’t have the space for them at my place.


Here’s the low-down on the system components:
2 – double MWM subs, each with 2 Klipsch K-43 15-inch drivers
2 – MSSM low mids, each with a single K-41 10-inch driver
2 – MSM high mids, each with 4 K-55-M compression drivers
2 – MTM tweeters, each with 5 piezo drivers
2 – MMTM tweeters that were added to the system later, I believe in the early 90s based on serial numbers, each with 4 K-77-M drivers (nice bonus!)
2 – M-4-B passive crossovers. One has a City of Fort Collins asset tag on it.


Each section pair is sequentially numbered, and about half of them still have their inspection tags.
 

Keep in mind I don't see this as a touring system - no handles or trim to make them roadworthy. Permanent installation in a 500-1500 seat venue, home theater, or some other non-travelling use is going to be ideal (although I suppose some of you more clever folks could retrofit them).

 

Some additional notes in the interest of transparency:

As stated above, during the time this set was part of a portable system it sustained a number of dents and scratches. While great care was taken and quality materials were used in the refinishing work, there are still some imperfections in the finish. However, the original finish was not as durable as the new, and the cabinets likely took some dings & scratches in their original installation and subsequent removal. Overall appearance is almost certainly much better now than when they left the Performance Hall.

 

Other cosmetic defects of note:

1. Klipsch logo plates on the MWMs and MTMs have some scratches (pictured). I checked with Klipsch and they no longer stock the plates, so I left them as-is.

IMG_2772.JPG

 

2. The logos on the MSM horns took some dings that a previous owner touched up with less than perfect results (pictured). Not being an expert with fiberglass, I left them as I found them. It doesn't really detract from the overall appearance.

IMG_2771.JPG

 

Weight and Transportation

Those familiar with MCMs know they’re a bear to move. Larger sections move quite easily on furniture dollies, which I'll include if desired, but they have no handles so lifting must be done with care and forethought (and several sets of hands). That said, transporting them from Colorado myself when I bought them turned out to be easier than I anticipated.

I’ve checked into transport via freight door-to-door, which seems to run an average of about $1.50 per mile. I'm open to exploring that option with the buyer, and would pack & pallet for no extra charge.

 

I have several avenues to sell them but want to start with the Klipsch Community first.

Given their present condition and where they came from I'm asking $4500 w/pickup in Minneapolis, but I’m open to discussion.

 

As for myself, I’m a Klipsch enthusiast dating back to 1978 when I heard my first pair of La Scalas. Since I was doing some freelance sound work and my budget was tight back then, I picked up a pair of Industrial Heresy’s (HI-BG) for use in small venues and got raves. In 1982 I went to work for a local company that sold the Klipsch Professional line, and I had the privilege of spending some time at the Klipsch facility in 1983, including visits to the Paul Klipsch home (any others of you know about Paul's train set? He gave me a demo - funny story.). I upgraded to La Scalas that year (still have them), and I never get tired of their magnificent sound.

 

Thanks everyone!

 

Jim

 

IMG_1931.JPG   IMG_1919.JPG

 

IMG_1952.JPG       IMG_1953.JPG

 

IMG_1927l.JPG   IMG_2973.JPG

 

 

 

 

 

hi friend, still have the components? I was interested for a pair of :  MSM,  MTM & MMTM, for your attention to my request, thank you 

Share this post


Link to post
Share on other sites

FULLY horn loaded PA system. PWK would be proud of every one of these we've saved, salvaged, rebuilt. It's a labor of love in most cases. These have a very nice background and subsequently show much less physical wear than many I've been through. 

 

For comparison, I use a set of 4-way MCM in my workshop 36x48. Fills the room nicely lol 

 

GLWS

 

Michael 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...