RockOn4Klipsch Posted November 30, 2016 Share Posted November 30, 2016 I recently was gifted a new receiver that I've put in place of my Stage One pre. I'm having a hell of a time trying to get the 12v trigger to work. Does anyone have this model that could give me some insight? I have RTFM Like 15x, I still am not seeing what I need. A little about the current setup and what I've tried. I'm using the preouts on the Denon to connect to my amp. I have my amplifier, an Aragon 2005 (no native 12v trigger), plugged into the "switched" outlet of a Mondial RPC-120. The 12v trigger is connected to the 12v trigger out on the Denon 3311ci. In the settings on the Denon, there is an option for "trigger out" settings. I have it set to "Main Zone" in hopes that it would trigger the amp in the theater. I have also played with it triggering on with different inputs , sources and surround modes to enable it. I've googled for an hour or 2 with no results, I'm hoping it's something simple that I'm over looking. Thanks for the help!! Quote Link to comment Share on other sites More sharing options...
RockOn4Klipsch Posted December 1, 2016 Author Share Posted December 1, 2016 No one? Any ideas? Quote Link to comment Share on other sites More sharing options...
JJkizak Posted December 2, 2016 Share Posted December 2, 2016 You need to wait for someone who knows what is going on and what should be going on. JJK Quote Link to comment Share on other sites More sharing options...
Thaddeus Smith Posted December 2, 2016 Share Posted December 2, 2016 not a clue. definitely post over at AVSF if you haven't already. Quote Link to comment Share on other sites More sharing options...
TasDom Posted December 2, 2016 Share Posted December 2, 2016 There should be an option in the trigger settings to reset to factory default. Try that and attempt your process again. Double check the zone and input selections also after the reset. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.