Jump to content

2017 Pilgrimage "For Sale" thread.


CECAA850

Recommended Posts

31 minutes ago, hogwylde09 said:

I know this is a good cause for fellow forum members, and Klipsch affectionados/addicts.
But what should feasible prices be set at? I don't really want to get top (other auction site) prices. But not give it away for way less than worth. I am thinking of a lot of vintage pieces may be bringing. Just some thoughts?

Sent from my SM-N900V using Tapatalk
 

Figure out a price that you can live with that the buyer will appreciate as well.

Link to comment
Share on other sites

I am cleaning house and can bring a few things things...especially if anyone shows interest beforehand.

1)  Mission 700 speakers (5)

2)  Great White Whale Point 3 System speakers

3)  Knight KG 765 tuner

4)  Yamaha YST-SW50 subwoofer

5)  Pioneer SA 7500 integrated amp (one bad channel)

 

Thanks....Wm

 

  • Like 1
Link to comment
Share on other sites

Located in NW Indiana.  Please PM me with interest.

 

$425 per pair.

 

 

 

Heresy 1 – Pair #3 Walnut Oil

Consecutive serial numbers 22P 812/813 (1976)

K77 Square Magnet tweeters

K55 V Push Terminal Mid drivers

K22 EF Square Magnet Woofers

All new gaskets on drivers and cabinet

Crossovers Type E – recapped with Dayton 1% Precision Audio Grade Capacitors

New 5 way binding posts

Excellent condition grills with Klipsch copper badges

Howard’s Restore A Finish/Watco Rejuvenating Oil on cabinetry

 

 

 

 

 

 

 

 

 

IMG_0648 (Large) (Small).JPG

IMG_0649 (Large) (Small).JPG

IMG_0650 (Large) (Small).JPG

IMG_0651 (Large) (Small).JPG

IMG_0654 (Large) (Small).JPG

 

 

 

 

 

 

 

 

 

  • Like 1
Link to comment
Share on other sites

I may be willing to bring my single walnut H700, 1E234, since it seems unlikely I will find a match. 

Looks like it is the 234th H700 (and Heresy?) made. 

 

Any interest?  It looks very nice and sounds right, too.  . 

Link to comment
Share on other sites

I have several AV receivers that I'm bringing to sell at the Pilgrimage.  I need to clean them up, find a few knobs, make sure they are shined and polished, etc, but I wanted to post a list now so anyone interested could start thinking about it.  Pics below the list.

 

Kenwood KR-V5570 ($60)

·         Power output: 60 watts per channel into 8Ω (stereo)

·         Surround output: 50W (front), 50W (center), 20W (rear)

·         Frequency response: 20Hz to 20kHz

·         Total harmonic distortion: 0.06%

·         Input sensitivity: 2.5mV (MM), 200mV (line)

·         Signal to noise ratio: 74dB (MM), 100dB (line)

·         Video Connections: composite

·         Dimensions: 440 x 143 x 340mm

·         Weight: 8.2kg

·         Year: 1995

 

Denon AVR-2106 ($80)

·         7 Channels equal power amplifier section

·         100 watts per channel (8 ohms, 20 Hz-20 kHz, <.08%THD)

·         Analog Devices 24 bit, 192 kHz high resolution DACs on all eight channels

·         True 24 bit, 96 kHz Digital Interface Receiver

·         24 bit, 96 kHz A/D conversion on all Stereo analog inputs (Not EXT. Inputs)

·         Dolby Digital Surround EX, Pro Logic IIx decoding with Cinema and Music Modes

·         DTS Extended Surround Discrete 6.1 decoding

·         DTS Extended Surround Matrix 6.1 decoding

·         DTS Neo:6 Cinema & Music Surround decoding

·         DTS ES 96/24 5.1 decoding for DVD Video

·         Analog Devices HammerHead, 32 bit floating point DSP processor

·         7.1 channel Auto-Setup and Room EQ function with included DENON microphone DM-S205

·         Adjustable High and Low Pass Crossover (40/60/80/100/120/150/200/250Hz)

·         Front left and right channel bass and treble control

·         3 Assignable component video inputs (100MHz), with On-Screen Display

·         Video Conversion of Composite to S-Video and/or to Component, with on-screen display

·         5 sets composite and "S" video inputs

·         5.1 external wide bandwidth (100 kHz) analog inputs for multi-channel formats (such as DVD-Audio/SACD)

·         5/6/7 Channel Stereo

·         Digitally regulated volume control with .5dB increment adjustments and step range of -80 to +15

·         Personal Memory Plus

·         XM Satellite Radio Ready, Connect and Play Antenna sold seperately

·         5 assignable digital inputs (3 Optical, 2 Coaxial)

·         1 Optical digital output

·         11 analog inputs including built-in AM/FM tuner

·         True 2 Source, 2 Zone functionality with Discrete Power, Source Select and Volume control for each zone

·         (1)Multi-Zone fixed stereo pre-amp level audio output; or variable level (variable with SRB/Z2 jacks in 5.1 surround mode)

·         7.1 Preamp outputs

·         Power Amplifier Assign function, lets you assign 2 of the 7 amp channels to drive Zone 2 speakers directly or Bi-Amp Front Left and Right channels

·         On-Screen Display

·         Pre-programmed Glow Key remote

·         2 Assignable +12 volt, 250mA Trigger outputs

·         RS-232C port for third party control systems

·         Remote I/O ports

·         Dimensions: 17.1"w x 6.7"h x 16.4"d

 

 

Onkyo TX-SR307 ($100)

·            65 Watts per Channel at 8 Ohms, 1 kHz, 0.7%, 2 Channels Driven, FTC; 90 Watts per Channel at 6 Ohms, 1 kHz, 0.9%, 2 Channels Driven, FTC

·            3 HDMI™ Inputs and I Output for Video, HDMI Pass-Thru* (Version 1.3 Compatible with 1080p, Deep Color™, and x.v.Color™)

·            Audyssey 2EQ™ to Correct Room Acoustic Problems and to Calibrate Speakers

·            Music Optimizer for Compressed Digital Music Files

·            4 DSP Modes for Gaming: Rock, Sports, Action, and Role Playing Game (RPG)

 

Denon DRA-545R ($60)

·         Power output: 60 watts per channel into 8Ω (stereo)

·         Frequency response: 20Hz to 50kHz

·         Total harmonic distortion: 0.05%

·         Input sensitivity: 2.5mV (MM), 150mV (line)

·         Signal to noise ratio: 78dB (MM), 95dB (line)

·         Output: 2V (Pre out)

·         Video Connections: composite

·         Dimensions: 434 x 130 x 312mm

·         Weight: 6.8kg

 

Concept 2.5 ($150)

<excerpt from a vintage receiver review website> The Concept line of stereo receivers were offered by Pacific Stereo as a house brand. The top of the line was the 16.5. The low end was the 2.5. Despite being an economy model it was actually a pretty good little receiver. It produces 35 watts per channel and has appealing looks.  Concept implemented an interesting design with their push button controls. There is a built in LED in each push button. The LED's make it easier to see which functions are active in low light or darkness. Designed by Richard Shramm of Parasound fame.

 

Denon AVR-3803 ($100)

·               7 Channels equal power amplifier section

·               110 watts per channel (8 ohms, 20 Hz-20 kHz, <.05%THD)

·               150 watts per channel (6 ohms, 1 kHz, <.7%THD)

·               16 Burr-Brown PCM-1791 24 bit, 192 kHz high resolution DACs on all eight channels, in differential configuration

·               Real 24 bit, 96 kHz Digital Interface Receiver

·               24 bit, 192 kHz A/D conversion (Burr-Brown PCM-1804) on all analog inputs

·               ALPHA 24 Processing (AL24) in Stereo/Direct/Pure Direct modes (left/right channels)

·               Dolby Digital Surround EX, Pro Logic II decoding with Cinema and Music Modes

·               DTS Extended Surround Discrete 6.1 decoding

·               DTS Extended Surround Matrix 6.1 decoding

·               DTS Neo:6 Cinema & Music Surround decoding

·               DTS ES 96/24 5.1 decoding for DVD Video 

·               New DDSC-Digital featuring Analog Devices Melody 100 (HammerHead SHARC) 32 bit floating point DSP processor

·               Adjustable High and Low Pass Crossover (40/60/80/100/120Hz)

·               Front left and right bass and treble control

·               2 Assignable component video inputs (100MHz), with On-Screen Display

·               Video Conversion of Composite to S-Video and/or to Component, with on-screen display

·               7 sets composite and "S" video inputs

·               7.1 external wide bandwidth (100 kHz) input for future multi-channel formats (such as DVD-Audio)

·               5/7 Channel Stereo

·               Digitally regulated volume control with .5dB increment adjustments and step range of -80 to +15

·               Audio Delay adjustment to match audio signals with video signals(0-200ms)

·               Personal Memory Plus

·               7 assignable digital inputs (5 Optical, 2 Coaxial)

·               2 Optical digital outputs

·               9 analog inputs including built-in AM/FM tuner

·               Multi-Zone 1 stereo pre-amp level audio outputs, fixed or variable level

·               Multi-Zone 1 Composite Video output

·               Power Amplifier Assign function, lets you assign 2 of the 7 amp channels to drive second zone speakers directly

·               LCD dot-matrix programmable/learning remote full backlighting

·               Serial Port for Third Party RS-232 Control Systems

 

Marantz SR7200 ($125)

·         110 watts x 7 channels all discrete amplifier stage,

·         current feedback amplification,

·         HDMI v1.3a repeating/switching:

·         4-In/2-Out, Dolby® TrueHD, Dolby® Digital Plus, dts-HD™ Master Audio, Deep Color, xvYCC and SA-CD support by HDMI,

·         up-conversion (w/TBC) to HDMI with 480i/480p converter,

·         dual component outputs,

·         M-DAX (Marantz Dynamic Audio eXpander) for compressed audio,

·         Audyssey MultEQ,

·         Direct-Set volume,

·         tuner preset and XM preset commands,

·         RS-232C control and IR flasher input,

·         x2 12V DC trigger output,

·         2nd zone audio

 

Realistic SA-100B ($20)

10wpc – not much info.  Early 70s initial release

 

Sony STR-DH520  ($100)

·         TOTAL 945W (135W/ch x 7 @8ohm, 1kHz, THD 0.05%)

·         6 HD Inputs (4 HDMI, 2 Component)

·         3D pass-through

·         HD Digital Cinema Sound (HD DCS)

·         Dolby TrueHD, Pro logic IIz and dts HD Enhanced Audio Codecs

·         7.1-channel AV receiver with 100W per channel

·         6 HD Inputs (4 HDMI, 2 component)

·         3D pass-through capability

·         HD Digital Cinema Sound (HD DCS)

·         Dolby TrueHD, Pro logic IIz and dts HD enhanced audio codecs

 

Pioneer Elite VSX-82TSX ($150)

·         Power output: 130 watts per channel into 8Ω (stereo)

·         Surround output: 130W (front), 130W (center), 130W (rear)

·         Frequency response: 5Hz to 100kHz

·         Built-in Decoders:  DTS, DTS 96/24, DTS Neo:6, DTS-ES Discrete 6.1, Dolby Digital Surround EX, Dolby Pro Logic IIx, THX Select 2

·         Receiver Tuner Bands:  AM/FM

·         Total harmonic distortion: 0.09%

·         Input sensitivity: 335mV (line)

·         Signal to noise ratio: 103dB (line)

·         Output: 335mV (line)

·         Digital inputs: coaxial, optical

·         Video Connections: HDMI, component, composite, SVHS

·         Dimensions: 420 x 187 x 462mm

 

 

 

20170326_223741.jpg

20170326_223751.jpg

20170326_223811.jpg

20170326_223821_Burst03.jpg

Link to comment
Share on other sites

On ‎3‎/‎27‎/‎2017 at 3:21 PM, pat_in_dfw said:

I have several AV receivers that I'm bringing to sell at the Pilgrimage.  I need to clean them up, find a few knobs, make sure they are shined and polished, etc, but I wanted to post a list now so anyone interested could start thinking about it.  Pics below the list.

 

Kenwood KR-V5570 ($60)

·         Power output: 60 watts per channel into 8Ω (stereo)

·         Surround output: 50W (front), 50W (center), 20W (rear)

·         Frequency response: 20Hz to 20kHz

·         Total harmonic distortion: 0.06%

·         Input sensitivity: 2.5mV (MM), 200mV (line)

·         Signal to noise ratio: 74dB (MM), 100dB (line)

·         Video Connections: composite

·         Dimensions: 440 x 143 x 340mm

·         Weight: 8.2kg

·         Year: 1995

 

Denon AVR-2106 ($80)

·         7 Channels equal power amplifier section

·         100 watts per channel (8 ohms, 20 Hz-20 kHz, <.08%THD)

·         Analog Devices 24 bit, 192 kHz high resolution DACs on all eight channels

·         True 24 bit, 96 kHz Digital Interface Receiver

·         24 bit, 96 kHz A/D conversion on all Stereo analog inputs (Not EXT. Inputs)

·         Dolby Digital Surround EX, Pro Logic IIx decoding with Cinema and Music Modes

·         DTS Extended Surround Discrete 6.1 decoding

·         DTS Extended Surround Matrix 6.1 decoding

·         DTS Neo:6 Cinema & Music Surround decoding

·         DTS ES 96/24 5.1 decoding for DVD Video

·         Analog Devices HammerHead, 32 bit floating point DSP processor

·         7.1 channel Auto-Setup and Room EQ function with included DENON microphone DM-S205

·         Adjustable High and Low Pass Crossover (40/60/80/100/120/150/200/250Hz)

·         Front left and right channel bass and treble control

·         3 Assignable component video inputs (100MHz), with On-Screen Display

·         Video Conversion of Composite to S-Video and/or to Component, with on-screen display

·         5 sets composite and "S" video inputs

·         5.1 external wide bandwidth (100 kHz) analog inputs for multi-channel formats (such as DVD-Audio/SACD)

·         5/6/7 Channel Stereo

·         Digitally regulated volume control with .5dB increment adjustments and step range of -80 to +15

·         Personal Memory Plus

·         XM Satellite Radio Ready, Connect and Play Antenna sold seperately

·         5 assignable digital inputs (3 Optical, 2 Coaxial)

·         1 Optical digital output

·         11 analog inputs including built-in AM/FM tuner

·         True 2 Source, 2 Zone functionality with Discrete Power, Source Select and Volume control for each zone

·         (1)Multi-Zone fixed stereo pre-amp level audio output; or variable level (variable with SRB/Z2 jacks in 5.1 surround mode)

·         7.1 Preamp outputs

·         Power Amplifier Assign function, lets you assign 2 of the 7 amp channels to drive Zone 2 speakers directly or Bi-Amp Front Left and Right channels

·         On-Screen Display

·         Pre-programmed Glow Key remote

·         2 Assignable +12 volt, 250mA Trigger outputs

·         RS-232C port for third party control systems

·         Remote I/O ports

·         Dimensions: 17.1"w x 6.7"h x 16.4"d

 

 

Onkyo TX-SR307 ($100)

·            65 Watts per Channel at 8 Ohms, 1 kHz, 0.7%, 2 Channels Driven, FTC; 90 Watts per Channel at 6 Ohms, 1 kHz, 0.9%, 2 Channels Driven, FTC

·            3 HDMI™ Inputs and I Output for Video, HDMI Pass-Thru* (Version 1.3 Compatible with 1080p, Deep Color™, and x.v.Color™)

·            Audyssey 2EQ™ to Correct Room Acoustic Problems and to Calibrate Speakers

·            Music Optimizer for Compressed Digital Music Files

·            4 DSP Modes for Gaming: Rock, Sports, Action, and Role Playing Game (RPG)

 

Denon DRA-545R ($60)

·         Power output: 60 watts per channel into 8Ω (stereo)

·         Frequency response: 20Hz to 50kHz

·         Total harmonic distortion: 0.05%

·         Input sensitivity: 2.5mV (MM), 150mV (line)

·         Signal to noise ratio: 78dB (MM), 95dB (line)

·         Output: 2V (Pre out)

·         Video Connections: composite

·         Dimensions: 434 x 130 x 312mm

·         Weight: 6.8kg

 

Concept 2.5 ($150)

<excerpt from a vintage receiver review website> The Concept line of stereo receivers were offered by Pacific Stereo as a house brand. The top of the line was the 16.5. The low end was the 2.5. Despite being an economy model it was actually a pretty good little receiver. It produces 35 watts per channel and has appealing looks.  Concept implemented an interesting design with their push button controls. There is a built in LED in each push button. The LED's make it easier to see which functions are active in low light or darkness. Designed by Richard Shramm of Parasound fame.

 

Denon AVR-3803 ($100)

·               7 Channels equal power amplifier section

·               110 watts per channel (8 ohms, 20 Hz-20 kHz, <.05%THD)

·               150 watts per channel (6 ohms, 1 kHz, <.7%THD)

·               16 Burr-Brown PCM-1791 24 bit, 192 kHz high resolution DACs on all eight channels, in differential configuration

·               Real 24 bit, 96 kHz Digital Interface Receiver

·               24 bit, 192 kHz A/D conversion (Burr-Brown PCM-1804) on all analog inputs

·               ALPHA 24 Processing (AL24) in Stereo/Direct/Pure Direct modes (left/right channels)

·               Dolby Digital Surround EX, Pro Logic II decoding with Cinema and Music Modes

·               DTS Extended Surround Discrete 6.1 decoding

·               DTS Extended Surround Matrix 6.1 decoding

·               DTS Neo:6 Cinema & Music Surround decoding

·               DTS ES 96/24 5.1 decoding for DVD Video 

·               New DDSC-Digital featuring Analog Devices Melody 100 (HammerHead SHARC) 32 bit floating point DSP processor

·               Adjustable High and Low Pass Crossover (40/60/80/100/120Hz)

·               Front left and right bass and treble control

·               2 Assignable component video inputs (100MHz), with On-Screen Display

·               Video Conversion of Composite to S-Video and/or to Component, with on-screen display

·               7 sets composite and "S" video inputs

·               7.1 external wide bandwidth (100 kHz) input for future multi-channel formats (such as DVD-Audio)

·               5/7 Channel Stereo

·               Digitally regulated volume control with .5dB increment adjustments and step range of -80 to +15

·               Audio Delay adjustment to match audio signals with video signals(0-200ms)

·               Personal Memory Plus

·               7 assignable digital inputs (5 Optical, 2 Coaxial)

·               2 Optical digital outputs

·               9 analog inputs including built-in AM/FM tuner

·               Multi-Zone 1 stereo pre-amp level audio outputs, fixed or variable level

·               Multi-Zone 1 Composite Video output

·               Power Amplifier Assign function, lets you assign 2 of the 7 amp channels to drive second zone speakers directly

·               LCD dot-matrix programmable/learning remote full backlighting

·               Serial Port for Third Party RS-232 Control Systems

 

Marantz SR7200 ($125)

·         110 watts x 7 channels all discrete amplifier stage,

·         current feedback amplification,

·         HDMI v1.3a repeating/switching:

·         4-In/2-Out, Dolby® TrueHD, Dolby® Digital Plus, dts-HD™ Master Audio, Deep Color, xvYCC and SA-CD support by HDMI,

·         up-conversion (w/TBC) to HDMI with 480i/480p converter,

·         dual component outputs,

·         M-DAX (Marantz Dynamic Audio eXpander) for compressed audio,

·         Audyssey MultEQ,

·         Direct-Set volume,

·         tuner preset and XM preset commands,

·         RS-232C control and IR flasher input,

·         x2 12V DC trigger output,

·         2nd zone audio

 

Realistic SA-100B ($20)

10wpc – not much info.  Early 70s initial release

 

Sony STR-DH520  ($100)

·         TOTAL 945W (135W/ch x 7 @8ohm, 1kHz, THD 0.05%)

·         6 HD Inputs (4 HDMI, 2 Component)

·         3D pass-through

·         HD Digital Cinema Sound (HD DCS)

·         Dolby TrueHD, Pro logic IIz and dts HD Enhanced Audio Codecs

·         7.1-channel AV receiver with 100W per channel

·         6 HD Inputs (4 HDMI, 2 component)

·         3D pass-through capability

·         HD Digital Cinema Sound (HD DCS)

·         Dolby TrueHD, Pro logic IIz and dts HD enhanced audio codecs

 

Pioneer Elite VSX-82TSX ($150)

·         Power output: 130 watts per channel into 8Ω (stereo)

·         Surround output: 130W (front), 130W (center), 130W (rear)

·         Frequency response: 5Hz to 100kHz

·         Built-in Decoders:  DTS, DTS 96/24, DTS Neo:6, DTS-ES Discrete 6.1, Dolby Digital Surround EX, Dolby Pro Logic IIx, THX Select 2

·         Receiver Tuner Bands:  AM/FM

·         Total harmonic distortion: 0.09%

·         Input sensitivity: 335mV (line)

·         Signal to noise ratio: 103dB (line)

·         Output: 335mV (line)

·         Digital inputs: coaxial, optical

·         Video Connections: HDMI, component, composite, SVHS

·         Dimensions: 420 x 187 x 462mm

 

 

 

20170326_223741.jpg

20170326_223751.jpg

20170326_223811.jpg

20170326_223821_Burst03.jpg

If I show up at Hope I can get my knob shined? Exactly what kind of a party is Rodney allowing at his pig farm? Hogging on a Saturday night brings back memories.

Oh wait, I meant chickens. I think

 

Mark

Link to comment
Share on other sites

On ‎4‎/‎2‎/‎2017 at 0:06 AM, ZEUS121996 said:

Exactly what kind of a party is Rodney allowing at his pig farm?

You gotta show up to find out.  4 live bands and all the martinis you can drink for starters.

  • Like 2
Link to comment
Share on other sites

On 3/23/2017 at 6:15 PM, jimjimbo said:

Photos added, prices adjusted.

 

I have 3 pairs of Heresy I's that I can bring to Hope.  All are Walnut Oil.  Each pair have sequential serial numbers.  Descriptions below.

 

 If you are relatively local to the South Bend/Chicago area, and would like one of these pairs, I would be happy to sell before making the trip to Hope.  I will update the listing if availability changes before the event.  

 

Please PM me with interest.  Please let me know if you are seriously interested, otherwise I am not going to bring all 3 pairs to Hope.

 

$475 per pair.

 

Heresy 1 – Pair #1 Walnut Oil

Consecutive serial numbers 130W 428/429 (1981)

K77 Square Magnet tweeters

K55 V Push Terminal Mid drivers

K22 Round Magnet Woofers

All new gaskets on drivers and cabinet

Crossovers Type E – recapped with Dayton 1% Precision Audio Grade Capacitors

New 5 way binding posts

Excellent condition grills with Klipsch copper badges

Howard’s Restore A Finish/Watco Rejuvenating Oil on cabinetry

 

 

Heresy 1 – Pair #2 Walnut Oil

Consecutive serial numbers 70S 412/413 (1978)

K77 Round Alnico Magnet tweeters

K55V Push Terminal Mid drivers

K22EF Square Magnet Woofers

All new gaskets on drivers and cabinet

Crossovers Type E – recapped with Dayton 1% Precision Audio Grade Capacitors

New 5 way binding posts

Excellent condition grills with proper Klipsch copper badges

Howard’s Restore A Finish/Watco Rejuvenating Oil on cabinetry

 

 

Heresy 1 – Pair #3 Walnut Oil

Consecutive serial numbers 22P 812/813 (1976)

K77 Square Magnet tweeters

K55 V Push Terminal Mid drivers

K22 EF Square Magnet Woofers

All new gaskets on drivers and cabinet

Crossovers Type E – recapped with Dayton 1% Precision Audio Grade Capacitors

New 5 way binding posts

Excellent condition grills with Klipsch copper badges

Howard’s Restore A Finish/Watco Rejuvenating Oil on cabinetry

IMG_0642 (Large) (Small).JPG

IMG_0632 (Large) (Small).JPG

IMG_0633 (Large) (Small).JPG

IMG_0636 (Large) (Small).JPG

IMG_0634 (Large) (Small).JPG

IMG_0635 (Large) (Small).JPG

IMG_0639 (Large) (Small).JPG

IMG_0641 (Large) (Small).JPG

IMG_0647 (Large) (Small).JPG

IMG_0648 (Large) (Small).JPG

IMG_0649 (Large) (Small).JPG

IMG_0650 (Large) (Small).JPG

IMG_0651 (Large) (Small).JPG

IMG_0654 (Large) (Small).JPG

Photos added, prices adjusted.

  • Like 2
Link to comment
Share on other sites

Inline image

 

JBL 2482 drivers.  Good condition.

 

Klipsch Type B.  Was a pretty unmolested Type E in a sealed cabinet all its life.  Brand new auricaps to make for Type B.  Great for cornwall or cornscala.  All first order.  Yes autoformer adjusted for correct taps.

 

raw?appid=YahooMailNeo&ymreqid=748b4440-483b-90e3-0112-fb0060010000&token=zitEzqOML3j84e6ealFTT5U7-km5qEQF52lp7AcCuBa-V88nFeJGHXrrtaxg8foDCoIaZ-xMWy7MXwFUt-wJXmrgBZuXkh_XqsZ4G5X83XoGYHG5zZROOYeWZBW-NzAx

 

Juicy Music Peach.  Lookover by Nosvalves w/in last 6 months.  One of the best wood cabinets.  Had guys over w/in the last month and partied to it mated with MC275s monoblocked and my minipunch setup.  N20160220_140754.thumb.jpg.51ee9a74173cbd061179b89970bdf764.jpgo issues.  6922 variety not 6H30.  Comes with tubes that came with the unit.  

 

 

20160220_105138.jpg

20160220_105816.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...