MikeyIdaho Posted January 13, 2017 Share Posted January 13, 2017 Just want to throw this quick question out there. I just picked up two pairs of RP-160Ms and while reading reviews online I came across this photo. He claimed he cross wired "so as not to favor either of the two frequency branches". Did some googling and searched the forum but all the results were about bi amping or bi wiring. Any real benefit compared to just plugging in both at the bottom or top? Quote Link to comment Share on other sites More sharing options...
The History Kid Posted January 13, 2017 Share Posted January 13, 2017 I do this because of the reason specified. It prevents having issues where you get sound simply out of just the high or low. If a wire is loose somewhere in the chain, the speaker will just stop working. I had heard stories where running lines to only the high or only the low could cause damage to the internal parts, but I've also heard that is not true. Still, I'd rather be able to know there's a problem by a speaker not working altogether, and therefore I tend to wire like this. 1 Quote Link to comment Share on other sites More sharing options...
willland Posted January 14, 2017 Share Posted January 14, 2017 I do it just because. Bill 1 Quote Link to comment Share on other sites More sharing options...
wvu80 Posted January 14, 2017 Share Posted January 14, 2017 As long as those two connectors are bridged, it makes NO DIFFERENCE to the signal whether you use two +/- tops, two +/- bottoms, or mixed, top + and - bottom. Or - top, and + bottom. Do you know why? They are bridged. Connected. Two, acting as one, just like marriage. Well, maybe not like that last one. Quote Link to comment Share on other sites More sharing options...
efzauner Posted January 14, 2017 Share Posted January 14, 2017 From a circuit POV, assuming that the impedance of the bridge bars is negligibly low, I can see no benefit of doing this. Some of the logic sounds rather silly. Nothing will get damaged if one or both of the bridge bars get loose no matter how you connect them. The only thing that can really ever happen with either connection is if the bridge bar gets loose and pivots and touches the other terminal and shorts out your amp.. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.