JohnJ Posted April 11, 2022 Share Posted April 11, 2022 Love the way the setup for the equalizer is listed in Hz on that old amp! 4 Quote Link to comment Share on other sites More sharing options...
Dave1291 Posted April 11, 2022 Share Posted April 11, 2022 @JohnJ yea, that always had a coolness factor back in the day. Just whistles and bells... 3 Quote Link to comment Share on other sites More sharing options...
JohnJ Posted April 11, 2022 Share Posted April 11, 2022 Hey, I'd bet it works well too. Many recordings had me taking the edge off of the treble or bumping the bass with my old heresies! 5 Quote Link to comment Share on other sites More sharing options...
Dave1291 Posted April 11, 2022 Share Posted April 11, 2022 @JohnJYea, been there and done that too. I toyed with it a bit. It should sound great when it's finished but we'll see how that rolls. I'm in the armpit of Ohio. Hour from Toledo, two hours south of Cleveland and an hour north of Columbus. Right in the middle of that triangle and can't draw squat. Always been that way around here. Course I could prolly pay $20 a month and get wired up to cable but I think they cut that completely off their system. Whoa, just had an idea! I could borrow Floyd's pink pig, tether it w/coax and fly it about 40' above the house. Yea, buddy! 😂 5 Quote Link to comment Share on other sites More sharing options...
Mossy bottom Posted April 11, 2022 Share Posted April 11, 2022 These came in today...The Half-Speed Master, reissues! Looking forward to driving them around the block. 5 2 Quote Link to comment Share on other sites More sharing options...
MicroMara Posted April 11, 2022 Share Posted April 11, 2022 17 hours ago, Dave1291 said: Yea, had to keep up w/Full Range when he broke out all his beautiful solid state gear. I scratched an itch I'd had since these came out. Too pricey back in the day. I had a big Marantz and I was never home enough to truly enjoy it. This is the second Mac 4100 receiver I've seen my auctioneer post in the past 2-3 months so I caved. Got it at a great price but it was on a shelf in some old guy's 3 car garage full of junk. I also got a Sony cd player and Teac cassette deck as a bonus. It was powering a pair of old Zenith Allegro box speakers from the 60's or so. I just laffed and brought it home. Wiped an inch of dust off and fired it up. Could push it and leave it alone but I'll drop it off to the Mc tech a couple hours away. For what I payed it's the least I can do. Sounds great on my old Heresy right now! Yea, this one's on you @Full Range! ALL your fault. 😂 to be sure that you don´t destroy this beauty ...here´s the operation owners manual for you http://www.berners.ch/McIntosh/Downloads/MAC4100_own.pdf 1 2 Quote Link to comment Share on other sites More sharing options...
dirtmudd Posted April 11, 2022 Share Posted April 11, 2022 @Full Range are you buying tickets for the show! 3 Quote Link to comment Share on other sites More sharing options...
MicroMara Posted April 11, 2022 Share Posted April 11, 2022 Genesis played in Germany this early march. They gave three concerts in Berlin, Hannover and Cologne. Tickets were sold out since early 2021 . 4 Quote Link to comment Share on other sites More sharing options...
Full Range Posted April 12, 2022 Author Share Posted April 12, 2022 3 hours ago, dirtmudd said: are you buying tickets for the show! Normally I would I work about 5 streets from the venue However Monday is not a good day for me work wise - if it was Sat / Sunday then I would be there in the front row 3 Quote Link to comment Share on other sites More sharing options...
AndreG. Posted April 12, 2022 Share Posted April 12, 2022 Got this one from a member over at the German DUAL Forum. Excellent condition: 5 Quote Link to comment Share on other sites More sharing options...
Full Range Posted April 13, 2022 Author Share Posted April 13, 2022 Just spinning some Prog again but it’s been a while since I played this album Artist - Genesis Title - Duke Album ID - https://www.discogs.com/release/5813028-Genesis-Duke 4 2 Quote Link to comment Share on other sites More sharing options...
MicroMara Posted April 13, 2022 Share Posted April 13, 2022 23 hours ago, AndreG. said: Got this one from a member over at the German DUAL Forum. Excellent condition: It´s a must to see their Concert " Stop Making Sense " , from the beginning to the end ! 5 3 Quote Link to comment Share on other sites More sharing options...
grasshopper Posted April 13, 2022 Share Posted April 13, 2022 saw it at a friends. I do not recall what format... Prolly DVD.. well worth seeing 2 1 Quote Link to comment Share on other sites More sharing options...
Full Range Posted April 14, 2022 Author Share Posted April 14, 2022 @GWSmith & @Mossy bottom My Tchaikovsky 1812 just arrived The one sourced locally after the cancellation of the previous over seas purchase, and thankfully in NM condition Had a look at the Matrix / Runout inscription - TELSS 10041-A-12 M-1 B.L.-R.D.-RW Manufactured in Germany EDP 33 It’s variant 3 Side 1 on the ID Album ID - https://www.discogs.com/release/2205254-Tchaikovsky-Cincinnati-Symphony-Orchestra-Erich-Kunzel-1812-Capriccio-Italien-Cossack-Dance-From-Maz EDIT I just realised that the record is indeed the one above (Hooray) The actual cover is this one where they state it was distributed by Audio Technica https://www.discogs.com/release/15487551-Tchaikovsky-Cincinnati-Symphony-Orchestra-Erich-Kunzel-1812-Capriccio-Italien-Cossack-Dance-From-Maz 3 1 Quote Link to comment Share on other sites More sharing options...
Full Range Posted April 14, 2022 Author Share Posted April 14, 2022 Just arrived this morning A challenging record to be sure for most set ups I can confirm that my tonearm *did not even flinch * when the cannon fire was set off The album Runout ID is the one to get based on various forums and recommended by @GWSmith Runout inscription - TELSS 10041-A-12 M-1 B.L.-R.D.-RW Manufactured in Germany Title - Tchaikovsky*, Cincinnati Symphony Orchestra, Erich Kunzel – 1812 / Capriccio Italien / "Cossack Dance" From Mazeppa Album ID - https://www.discogs.com/release/2205254-Tchaikovsky-Cincinnati-Symphony-Orchestra-Erich-Kunzel-1812-Capriccio-Italien-Cossack-Dance-From-Maz 2 1 Quote Link to comment Share on other sites More sharing options...
Dave1291 Posted April 14, 2022 Share Posted April 14, 2022 @Full Range glad that lp works out for ya but did ya notice who did it? Cincy, which would be in Ohio! @JohnJ see that? O-H ! 1 Quote Link to comment Share on other sites More sharing options...
Full Range Posted April 14, 2022 Author Share Posted April 14, 2022 55 minutes ago, Dave1291 said: @Full Range glad that lp works out for ya but did ya notice who did it? Cincy, which would be in Ohio! @JohnJ see that? O-H ! Back at ya I O - Mate 🤘 1 1 Quote Link to comment Share on other sites More sharing options...
MicroMara Posted April 14, 2022 Share Posted April 14, 2022 Good news mates ..both tonarms are on their way back to my home. Bills are paid Works that were done on the SME Complete optical and technical Revision New SME moddy kit gold 24 carat RCA OFC copper tonearm inner wiring Bronze cutting bearing Headshell Connector revised Statics and balance checked and straightened Micro Seiki MA 505 MK II Complete optical and technical Revision VTA on the flight Revision and serviced New Wolfram String for Antiskating function New gold 5 Pin SME Connector OFC copper tonearm inner wiring Headshell Connector revised Statics and balance checked and straightened 3 2 Quote Link to comment Share on other sites More sharing options...
Dave1291 Posted April 14, 2022 Share Posted April 14, 2022 @JohnJ see that? Send him a couple albums and a t-shirt... Just like Pavlov! It's conditioning ya know. May as well send him your Clemson gear since you're now lovin U of Miami... Jamin just a tad this afternoon. Haven't been out to jam night so gonna get ready to slide out tomorrow evening. Sit back and watch mah dancing girls and listen to the boys. No rhyme or reason... ^^^^^^ one for the Birthday boy! 3 1 Quote Link to comment Share on other sites More sharing options...
Dave1291 Posted April 14, 2022 Share Posted April 14, 2022 @MicroMara Glad you got the bill paid! Should be pretty slick now so sit back and enjoy it. Dropped that Mcintosh off and asked if he'd recap w/YOUR caps and he told me np he's done it before, can't hear much of a difference and it would cost me at least $2500 and would take some time to do. Seriously??? I've got one foot in the grave! You're such a tease! hahaha That table should be amazing and really didn't take too long to get done. Going for the 3rd arm next? 😂 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.