avguytx Posted April 17, 2017 Share Posted April 17, 2017 Well, after a couple of months with them, Cornwall's don't work as well in my living room as the CF-3's. So, up for sale they go. They are Cornwall WO's sequential s/n's 18S238 & 239. Grills are stock and missing emblems (how I bought them) and I have used steel wool on cabinets and oiled them. They present very well. I had put Crites CT-120 tweeters in them but they will be sold with all of their stock parts (K33, K55, & K77). I'm keeping the CT-120's for the Belle clones. Only modifications done was converting the Type B crossovers to Type B-2 with Solen caps and Janzen coils. I will include the original leaking caps if you want them. They do work and sound great but my ears lean more towards the CF-3's. I will get more pictures of them as soon as I can but these were the ones taken when I got them. Asking $1000 and local pickup. I'm in Searcy, AR (NE of Little Rock) and might be able to meet within a reasonable distance. Quote Link to comment Share on other sites More sharing options...
-js- Posted April 17, 2017 Share Posted April 17, 2017 nice pair of CW. GLWYS. I love mine - don't think I will ever part with mine. Quote Link to comment Share on other sites More sharing options...
ACM Posted April 18, 2017 Share Posted April 18, 2017 PM sent Quote Link to comment Share on other sites More sharing options...
avguytx Posted April 24, 2017 Author Share Posted April 24, 2017 Still for sale. Could possibly bring them to Hope, although I can't be there for the weekend, I could come down with speakers if that would help. My daughter's prom is Saturday, so.. Quote Link to comment Share on other sites More sharing options...
Opus Posted April 24, 2017 Share Posted April 24, 2017 PM sent. Quote Link to comment Share on other sites More sharing options...
HDBRbuilder Posted April 24, 2017 Share Posted April 24, 2017 I probably built those CW's. FACING THE REAR of the cabinets, follow the rear edge of the side panel to your left up almost to the miter joint, and there should be some stamped-in initials. Usually one pair side by side and one single initial either above or below the pair. If there is an "A" in the mix, then I built them. 4 Quote Link to comment Share on other sites More sharing options...
avguytx Posted April 25, 2017 Author Share Posted April 25, 2017 Sale pending. 3 Quote Link to comment Share on other sites More sharing options...
Opus Posted April 29, 2017 Share Posted April 29, 2017 On 4/25/2017 at 10:36 AM, avguytx said: Sale pending. Thanks avguytx! I got them home with no problems. I'll spend tomorrow getting them placed and then listening to them. No better thing to do on a rainy Saturday! 1 Quote Link to comment Share on other sites More sharing options...
Opus Posted April 29, 2017 Share Posted April 29, 2017 On 4/24/2017 at 11:22 AM, HDBRbuilder said: I probably built those CW's. FACING THE REAR of the cabinets, follow the rear edge of the side panel to your left up almost to the miter joint, and there should be some stamped-in initials. Usually one pair side by side and one single initial either above or below the pair. If there is an "A" in the mix, then I built them. @HDBRbuilder, Yep, they have an "A" stamped on them. 2 Quote Link to comment Share on other sites More sharing options...
ChicagoCubby Posted April 10, 2020 Share Posted April 10, 2020 Did the upgrades make that big of difference in sound? I have reached out to Crites and he let me know about the B-2 crossovers. I wasn't aware of the Solen Caps and Janzen coil. Quote Link to comment Share on other sites More sharing options...
Mostec Posted April 12, 2020 Share Posted April 12, 2020 On 4/29/2017 at 5:32 AM, Opus said: @HDBRbuilder, Yep, they have an "A" stamped on them. How satisfied you are with upgraded Crossover? I'm planning exactly that crossover. Thank you for replay. Quote Link to comment Share on other sites More sharing options...
avguytx Posted April 13, 2020 Author Share Posted April 13, 2020 On 4/10/2020 at 11:21 AM, ChicagoCubby said: Did the upgrades make that big of difference in sound? I have reached out to Crites and he let me know about the B-2 crossovers. I wasn't aware of the Solen Caps and Janzen coil. They made a nice difference for sure and it's easy to do with the parts that are already on the Type B crossover. It's a petty minimal expense. 1 Quote Link to comment Share on other sites More sharing options...
OO1 Posted April 13, 2020 Share Posted April 13, 2020 8 minutes ago, avguytx said: They made a nice difference for sure and it's easy to do with the parts that are already on the Type B crossover. It's a petty minimal expense. thank you ---what I understand from you is that they sound a lot better than a Regular B - so what we see is a regular B2 with Jantzen coils -------do you have a copy of the layout , I'm just wondering what the coils change in terms of the overall XO -TX Quote Link to comment Share on other sites More sharing options...
avguytx Posted April 13, 2020 Author Share Posted April 13, 2020 14 minutes ago, Randyh said: thank you ---what I understand from you is that they sound a lot better than a Regular B - so what we see is a regular B2 with Jantzen coils -------do you have a copy of the layout , I'm just wondering what the coils change in terms of the overall XO -TX Go to the link below and scroll just a little ways down. It will show the B and B2 close together. Quote Link to comment Share on other sites More sharing options...
Godataloss Posted April 13, 2020 Share Posted April 13, 2020 Nice deal on those. I really liked my Cornwalls. Quote Link to comment Share on other sites More sharing options...
avguytx Posted April 13, 2020 Author Share Posted April 13, 2020 Only 3 years ago. Inflation has made them go up in some areas. lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.