SonicSeeker Posted April 19, 2017 Share Posted April 19, 2017 For some reason when I run automatic set-up it says all of the speakers polarity are reversed and they are not. Anyone have any idea why. Quote Link to comment Share on other sites More sharing options...
Srinath Posted April 19, 2017 Share Posted April 19, 2017 My Z9 also says that. It could be that one of the drivers is reversed because that's how your crossover needs it or a cap in the xo is reversed due to some design reason. Cool. Srinath. Quote Link to comment Share on other sites More sharing options...
SonicSeeker Posted April 19, 2017 Author Share Posted April 19, 2017 Yes it is weird, I have KG 5.2's, KG2.5's, and a KV-4 hooked to it. Quote Link to comment Share on other sites More sharing options...
willland Posted April 19, 2017 Share Posted April 19, 2017 Pretty common behavior with these auto EQ/room correction features. My Onkyo with Audyssey MultEQ XT as well as my NAD with same software "determined" the same error. I reran the setup and the error was gone. Other times the error popped up again and I just ignored it. Bill Quote Link to comment Share on other sites More sharing options...
BernardLVH Posted April 25, 2017 Share Posted April 25, 2017 Had the same issue with my Onkyo. There was a room issue causing a suck out or phase problem. I repositioned the speakers and problem solved. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.