juniper Posted April 25, 2017 Share Posted April 25, 2017 Very nice pair of BC jubilee bass bin xovers with bass boost. These are really nicely made heavy xovers. New they were 650 plus shipping. Asking 350. Thanks! Quote Link to comment Share on other sites More sharing options...
babadono Posted April 25, 2017 Share Posted April 25, 2017 There some iron in there! GLWYS. Quote Link to comment Share on other sites More sharing options...
juniper Posted April 25, 2017 Author Share Posted April 25, 2017 3 minutes ago, babadono said: There some iron in there! GLWYS. They feel like they weight over 25 pounds, they are beastly! Very well made! Quote Link to comment Share on other sites More sharing options...
Schu Posted April 26, 2017 Share Posted April 26, 2017 Maybe I should buy these so I have to buy. jubes 5 Quote Link to comment Share on other sites More sharing options...
diamonddelts Posted April 26, 2017 Share Posted April 26, 2017 Are these the Bob Crite two way crossovers which are made to go with the Faital Pro compression drivers he sells? Quote Link to comment Share on other sites More sharing options...
juniper Posted April 26, 2017 Author Share Posted April 26, 2017 34 minutes ago, diamonddelts said: Are these the Bob Crite two way crossovers which are made to go with the Faital Pro compression drivers he sells? They are for the Jub bass bins only, you would need a xover for the mids and tweets. Quote Link to comment Share on other sites More sharing options...
richieb Posted April 27, 2017 Share Posted April 27, 2017 ^^^^^ Correct. Those are exactly like I have for two-way Jubes. You indeed need the high frequency board for driver of choice. Mine are made for the Faital Pro. Two network boards for each L-R. Quote Link to comment Share on other sites More sharing options...
Coytee Posted April 28, 2017 Share Posted April 28, 2017 On 4/25/2017 at 1:38 PM, juniper said: with bass boost Is this correct? I was unaware that you can add boost in a passive.... Quote Link to comment Share on other sites More sharing options...
HiFi Heaven Posted May 2, 2017 Share Posted May 2, 2017 Really, guys? Come ON! In the Passive X-Over realm, "BOOST" is impossible, do the math, understand the physics. Attenuation of unwanted mid-bass frequencies results in a FAKE "BOOST" of deep bass - at the expense of efficiency, damping factor, and cost. You WILL need a bigger amplifier - 6 dB EQ = 4X the Power! CUTE Red Coils though... ALTEC's 30904 and 30920 "Equalizer/Attenuator" networks in Grenada & Barcelona were the earliest introduction of EQ into passive crossovers for the home, after the 9849/9848/9846 Studio Monitors - back in the mid 1970's. Quote Link to comment Share on other sites More sharing options...
juniper Posted May 2, 2017 Author Share Posted May 2, 2017 On Thursday, April 27, 2017 at 7:00 PM, Coytee said: Is this correct? I was unaware that you can add boost in a passive.... That's what it says on the xovers, don't know if Bob makes more than one type for the bass bins, so I added his phrasing..... Quote Link to comment Share on other sites More sharing options...
Deang Posted May 2, 2017 Share Posted May 2, 2017 A solid state amp will double its power when the impedance is cut in half. If the drop in impedance is in the right place - you can create a peaking circuit. 1 Quote Link to comment Share on other sites More sharing options...
Coytee Posted May 2, 2017 Share Posted May 2, 2017 There ya go! I had the chance to teach a couple people something today while at work....came home and learned something myself! Quote Link to comment Share on other sites More sharing options...
Srinath Posted May 2, 2017 Share Posted May 2, 2017 6 hours ago, Deang said: A solid state amp will double its power when the impedance is cut in half. If the drop in impedance is in the right place - you can create a peaking circuit. And likely make a lot more power when things let out the magic smoke ... unless of course the amp is capable of taking it. In any case, a graphic eq or a parametric eq that's in some of these amps can also do that same thing with less likelihood of smoking some thing. Cool. Srinath. Quote Link to comment Share on other sites More sharing options...
jwc Posted May 13, 2017 Share Posted May 13, 2017 What is the schematic of this? Quote Link to comment Share on other sites More sharing options...
BRK Posted May 13, 2017 Share Posted May 13, 2017 Still for sale? Quote Link to comment Share on other sites More sharing options...
juniper Posted May 18, 2017 Author Share Posted May 18, 2017 bumpppppppppp Quote Link to comment Share on other sites More sharing options...
jwc Posted September 27, 2017 Share Posted September 27, 2017 I asked the OP here permission to post this. I am offering a deal to go with the current bass bin crossovers posted already. I bought from Crites new... the HF boards for the Fiatal HF200 8 ohm drivers. I also bought the drivers new from him too. I set up a guy locally with these on a K402 in 2013. He has had a life change....moved....and doesn't need the equipment anymore. I will sell the drivers and the HF boards for $450 shipped in the CONUS. I also will include the 4 bolts installed in the drivers at the exact length to go on the K402 with the nuts. This will save you a lot of time putting these drivers on a K402.....it isn't that easy. So to accompany the current sale only....offering 2 boards and 2 drivers shipped in CONUS fedex insured. Personal check only and cleared before shipping. jc Quote Link to comment Share on other sites More sharing options...
jwc Posted September 27, 2017 Share Posted September 27, 2017 Pics.... Horns not for sale Quote Link to comment Share on other sites More sharing options...
jwc Posted September 27, 2017 Share Posted September 27, 2017 Drivers look new... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.