justinsweber Posted April 27, 2017 Share Posted April 27, 2017 Hey everyone... did a rewrite of this to share more about the project Im working on. Ive been a fan of Klipsch and tube amps for a long time. Given my amp choices, horn or single driver speakers are the preferred choices. Normally I build big honking speakers... I even built one my wife kicked out of the house... too large. In an effort to finally get some speakers in the TV room I went after something she has accepted before... the Heresy. She has liked it before due to its limited height... it doesn't block the windows. I love it as, its a 1950s VW battle with a Porsche engine hiding under the hood. The Heresy is an honest 96db speaker. Good for 50hz or so on up. Its a sealed box so no bass hump. Its mid bad is solid and its a fast speaker. Id consider it a gateway drug.I went of CL in search of a local purchase. In a perfect world I would have found a gen 1 heresy. You want this type as it has the screw on K55 driver... the same mid range in other Klipsch speakers like the Cornwall, LaScala or K Horn. Unfortunately as I planed to gut the speaker and start over, the only one in my price point was beatup and a gen 1.5 Heresy. $400 later it was delivered to my door. The plan is to use a ALK Crossover. Its adjustable and will make a Heresy actually sound good. Attenuating the mid and HF is super important and I still have HF hear and want to keep it that way. The woofers as K22 are perfectly fine.. maybe even good, but the Eminence LFA12 is better and closer to the pro K24 spec. The Tweeter as a K77 is good. Its even rebuild able now with new diaphragms should you need, but as I have access to Fastlane audio's elliptical tweeter... why not use a modern bad *** tweeter instead. Fastlane's tweeter lens is $100 for pair. The B&C DE10 or DE120 are my choices and are fantastic. I might go with Eminence ASD1001B as its American made and a solid performer too. I measured the drivers and got to selling all the parts I would not use on eBay. The Mid horns were the usable but not my cup, K701 with the bold on K53. (No one wants a K53/K701 combo). It got sold off for $100 to a local buyer who had his own project. I was able to purchase a K700/K55 push pin style (My preference on the K55) for $180 to my door. Normally this would be $200-$240 but I got a good deal. This will now make the Heresy a OG classic which has been upgraded. Same looking horn, but metal instead of ABS and Screw on instead of bolt on. (You can roll drivers if you wanted to now.).The cabs were less than ideal. Klipsch builds with 3/4" ply and 1/2" ply for he back panel. We laminated 1/4" to all the sides of the speaker... giving us a new corner edge and a stiffer cabinet. The front and back are edge banded to hide the lamination.The inside of the back panel had 1/4 MDF added. This will provide a key to center the back panel and panel increased surface area when its inset inside the cabinet... Long story short, its a hair smaller now but a ton stiffer. Additionally I love the look of slant risers on the Heresy. I went to Bob writes and ordered a set. Ebay sales:K77 Tweeters sold for $90E2 Crossovers sold for $50K22 Woofers sold for $80New parts:ALK CSW700 crossover $350Eminence 12LFA $130Fastlane audio Tweeter Lens $100Eminence ASD1001B $50 pairK700/K55 $180Wood Work$200 for extra ply/finishing costs$40 for the slant risers____________________________$810$240-$220Total: $830Im into the whole speaker for ~$1250. Its a lot of money for sure, but there is no way it would sound remotely as good. Work has just started but I wanted to show the starting point, and plan. Here are the before pics. Quote Link to comment Share on other sites More sharing options...
justinsweber Posted May 9, 2017 Author Share Posted May 9, 2017 Ok... not sure if being read but hey why not. Cabs got done... 1/4" ply on all sides... demanded the front and rear to hide the additional laminations. The back panel was only 1/2" so I added 1/4" MDF to the rear to stiffen it up. I went with Fastlane eliptracs. They were 2/16th shallow so we fly cut the mount to fur it out to be flush with the front. I then realized my driver (eminence ASD1001B) prevented the horn from sitting flush. After a 1/8th" removed from the front baffle cleat... God bless the finish router and some sand paper. With the eliptrac tweeter and the cabinet modified to fit perfectly I can see the finish line. 1 Quote Link to comment Share on other sites More sharing options...
jimjimbo Posted May 9, 2017 Share Posted May 9, 2017 Looking good Justin, I'm paying attention! 1 Quote Link to comment Share on other sites More sharing options...
Innocent_George Posted May 9, 2017 Share Posted May 9, 2017 Looking great! Kinda upset I got rid of my Herseys... Quote Link to comment Share on other sites More sharing options...
BRK Posted May 9, 2017 Share Posted May 9, 2017 Loving it!! I am watching with interest, as I have 6 pairs of Heresies! BRK Quote Link to comment Share on other sites More sharing options...
justinsweber Posted May 9, 2017 Author Share Posted May 9, 2017 I forgot just how good the heresy is. Ive been seeing parted out heresy and thought this would be a fun starter speaker. Show how far you can take it without really recreating... just modifying. I have big monster Cornscalas but the Heresy really does hold up on its own. Im a bit miffed I had to trim the inside of the cab bracing but why doing so, the tweeter fits perfectly. My biggest compliant is the crossover. The cornscalawal should allow me to rebalance the sound... esp the tweeter. Quote Link to comment Share on other sites More sharing options...
justinsweber Posted May 9, 2017 Author Share Posted May 9, 2017 As an aside, The Slant risers make the speaker. Ive built a set for my cornsclas... they make the speaker look like art... Quote Link to comment Share on other sites More sharing options...
justinsweber Posted May 11, 2017 Author Share Posted May 11, 2017 2 steps forward, 1 back. By adding the 1/4" mdf. The k55 contacts the back. Just enough to flex the panel. I used by router and dug our 1/8" to clearance for k55. Everything fits so nicely. Per ALKs advice I set the mid range at -10. (12, -2) and -8 on the tweeter. I assumed the k55 was 110db and the k24 was 95db. I think this was wrong. Perhaps the k55 is 106-107db? When I went from -12 to -10. Everything came into it's own. The tweeter was great at -6db but was starting to tickle. Exp told me to pull it back further and thus I got to -8. Tge bass is smaller than a cornscala but man is this a wonderful sounding speaker. Quote Link to comment Share on other sites More sharing options...
djk Posted May 11, 2017 Share Posted May 11, 2017 " I used by router and dug our 1/8" to clearance for k55. " Klipsch did that on some of the pro versions of the LaScala. Quote Link to comment Share on other sites More sharing options...
justinsweber Posted May 12, 2017 Author Share Posted May 12, 2017 Here they are all settled in. 3 Quote Link to comment Share on other sites More sharing options...
Honeybadger Posted May 13, 2017 Share Posted May 13, 2017 Looks good, nice project. HB Quote Link to comment Share on other sites More sharing options...
HDBRbuilder Posted May 17, 2017 Share Posted May 17, 2017 Hey Justin....long time no see! Quote Link to comment Share on other sites More sharing options...
justinsweber Posted May 18, 2017 Author Share Posted May 18, 2017 Still around... mostly just lurk :-). Quote Link to comment Share on other sites More sharing options...
HDBRbuilder Posted May 19, 2017 Share Posted May 19, 2017 18 hours ago, justinsweber said: Still around... mostly just lurk :-). I still "owe" you a custom decorator Heresy build...soon to be FINALLY retired...and yours is first on the list. I guess the H/K 430 is now long gone, huh? Quote Link to comment Share on other sites More sharing options...
justinsweber Posted May 22, 2017 Author Share Posted May 22, 2017 The H/K is gone... but I can always make from for some Heresy. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.