pat_in_dfw Posted June 26, 2017 Share Posted June 26, 2017 First pic is actual item. 2nd and 3rd pics are stock photos. The cabinets were completely sanded and stripped down to the bare wood and refinished. They look almost like new. Located in DFW area. Pickup only.The kg3.2's single 8-inch woofer has a polystyrene cone, a 20-ounce magnet, and a rubber surround. The speaker's low-frequency output is augmented by a 10-inch passive radiator mounted on the front panel below the woofer. The passive radiator contributes an effective output from its rated 36-hz cutoff frequency up to about 100 Hz. In previous systems in the kg line the passive radiators were located in the rear, but Klipsch engineers found that front-mounting produced better coupling with the output of the kg3's driven woofer.At 1,800 Hz there is a crossover to a horn-loaded, ferrofluid-cooled dome tweeter, with an 18-dB-per-octave slope to the tweeter and a 12-dB-per-octave slope to the woofer. T. The cabinet measures 24-1/4 inches high, 13-7/9 inches wide, and 11-1/4 inches deep, including the removable black cloth grille, and each speaker weighs 31 lbs.SPECIFICATIONS• DIMENSIONS: 25.5" (64.8cm) x 12.4" (31.5cm) x 10.75" (27.3cm)• ENCLOSURE MATERIAL: Medium density fiberboard construction (MDF)• ENCLOSURE TYPE: Bass reflex via passive radiator• FREQUENCY RESPONSE: 36Hz-20kHz(+-)3dB• HIGH FREQUENCY HORN:90x60 Exponential Horn• NOMINAL IMPEDANCE: 8 ohms• POWER HANDLING: 65 watts maximum continuous (325 watts peak)• SENSITIVITY: 94dB @ 1watt/1meter• TWEETER: K-84-K 1" (2.54cm) Phenolic dome compression driver• WEIGHT: 32 lbs. (14.5kg)• WOOFER: K-1002-K 8" (20.32cm) ICG cone active / KD-101-K 10" (25.4cm) ICG cone passive radiator Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.