Gxcad Posted March 22, 2001 Share Posted March 22, 2001 I have a new KK266-R and was wondering what you think it means when its turned on with everything in place and it fails to post or beep, and sends no signal to the monitor. The last time I remember my computer did this was when I oced my proc too far... I have never gotten my KK266-R to post but it does receive power (all the fans and jigamawats start to light up and turn).... any ideas? Thanks-Gxcadc> 1 Quote Link to comment Share on other sites More sharing options...
JakeTheSlayer Posted March 22, 2001 Share Posted March 22, 2001 take everything out except your vid card, ram and cpu. then see if it posts. also, you might want to try a different vid card. Quote Link to comment Share on other sites More sharing options...
rol1 Posted March 23, 2001 Share Posted March 23, 2001 Check your ram and cpu in a working system, especially the cpu with no posts. Quote Link to comment Share on other sites More sharing options...
Paragon Posted March 23, 2001 Share Posted March 23, 2001 What CPU do you have? Try the FSB set to 100MHz.. see if it works. http://www.anandtech.com/showdoc.html?i=1440&p=3 Quote Link to comment Share on other sites More sharing options...
Gxcad Posted March 27, 2001 Author Share Posted March 27, 2001 It seems like someone set me up the bomb...I mean I think my cpu is busted, I have tried various tests to come to this conclusion. Well, I have a 1.33 t-bird on the way so when that arrives I will find out now won't I? -Gxcadc> 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.