Maximus89 Posted October 26, 2021 Share Posted October 26, 2021 2 hours ago, CECAA850 said: A "y" adapter FROM the sub? I'm not sure I understand your signal chain. So one line can go to the Sub out on the preamp for movie LFE track and the other to the Left or Right speaker input on the preamp Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted October 26, 2021 Share Posted October 26, 2021 So you're trying to have 2 separate inputs to the sub correct? If so I'd use an rca switcher. 2 1 Quote Link to comment Share on other sites More sharing options...
Maximus89 Posted October 26, 2021 Share Posted October 26, 2021 Thanks, i took a quick look at some and while they look the part of something that will work perfectly, i'm just not sure how they'd connect to each device but ill figure it out! Quote Link to comment Share on other sites More sharing options...
babadono Posted October 26, 2021 Share Posted October 26, 2021 @Maximus89 I am having a little trouble understanding what you are trying to accomplish. If you are trying to have two different inputs to your RSW-15 at different times you will have to switch cables or get a switch as @CECAA850 has stated. Using a Y adapter or cable at the RSW-15 input from 2 outputs will short the 2 outputs together. DO NOT DO THIS. If you are trying to feed the input of the RSW-15 with 2 sources at the same time you will need a MIXER. Quote Link to comment Share on other sites More sharing options...
Maximus89 Posted October 26, 2021 Share Posted October 26, 2021 3 hours ago, babadono said: @Maximus89 I am having a little trouble understanding what you are trying to accomplish. If you are trying to have two different inputs to your RSW-15 at different times you will have to switch cables or get a switch as @CECAA850 has stated. Using a Y adapter or cable at the RSW-15 input from 2 outputs will short the 2 outputs together. DO NOT DO THIS. If you are trying to feed the input of the RSW-15 with 2 sources at the same time you will need a MIXER. That makes sense. this is what im looking at except the DAC option board is newer with usb which i use with my PC as a transport. D Output is Subwoofer. Both Balanced and Unbalanced outputs. I have 5.1 analog outs to the Line 1 Inputs of a multichannel analog HDMI DAC. Subwoofer gets the LFE signal using the Line 1. While it's not bad for music and i can use the sub with it, the DSD DAC board with USB is of higher quality for 2ch music, but the sub won't work for it even with DSP sub add ons in my foobar2000 settings. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.