biglion Posted September 2, 2017 Share Posted September 2, 2017 I have the RP-260 Home Theater System got it for a deal so trying to figure out options and price for amplifier that be good for this system 1 Quote Link to comment Share on other sites More sharing options...
teaman Posted September 2, 2017 Share Posted September 2, 2017 Hi biglion, welcome to the forum. Are you interested in a multichannel amp or a stereo amp? Not sure since you only posted the pair of Klipsch. We can help you better once you specify. Tim 1 Quote Link to comment Share on other sites More sharing options...
willland Posted September 2, 2017 Share Posted September 2, 2017 Biglion, Welcome to the forum. 25 minutes ago, teaman said: Hi biglion, welcome to the forum. Are you interested in a multichannel amp or a stereo amp? Not sure since you only posted the pair of Klipsch. We can help you better once you specify. Tim To add to what Teaman said, do you mean an AVR(Audio Video Receiver) or home theater receiver? Bill 1 Quote Link to comment Share on other sites More sharing options...
Moderators Youthman Posted September 2, 2017 Moderators Share Posted September 2, 2017 Just now, willland said: do you mean an AVR(Audio Video Receiver) or home theater receiver? Sadly...I didn't realize there was a difference. I've used both terms. I continue to learn something new every day. Welcome to the forums biglion. We can certainly help you spend your money. 1 Quote Link to comment Share on other sites More sharing options...
willland Posted September 2, 2017 Share Posted September 2, 2017 3 minutes ago, Youthman said: Sadly...I didn't realize there was a difference. There isn't but just wanted to throw out multiple terms to see if OP is familiar with any. Bill Quote Link to comment Share on other sites More sharing options...
wvu80 Posted September 2, 2017 Share Posted September 2, 2017 Hi @biglion welcome to the forums! I suggest an AVR for you. The 7.1 AVRs seem to be popular these days. Mainstream brands known to work well with Klipsch include Pioneer Elite, Yamaha Aventage, Denon, Marantz and Onkyo. Five hundred dollars can get you a nice sounding unit with lots of features. What is your AVR budget? Look for something with around 100 wpc (2 channels driven). More power means more expensive but if you can afford it more power is usually better. We can also help you choose good speaker wire at a good price if you haven't bought any yet. There is some stuff you want to stay away from. 1 Quote Link to comment Share on other sites More sharing options...
biglion Posted September 2, 2017 Author Share Posted September 2, 2017 hey thanks for everbodys replys not sure what u mean by multichannel amp or a stereo amp Quote Link to comment Share on other sites More sharing options...
biglion Posted September 2, 2017 Author Share Posted September 2, 2017 1 hour ago, wvu80 said: Hi @biglion welcome to the forums! I suggest an AVR for you. The 7.1 AVRs seem to be popular these days. Mainstream brands known to work well with Klipsch include Pioneer Elite, Yamaha Aventage, Denon, Marantz and Onkyo. Five hundred dollars can get you a nice sounding unit with lots of features. What is your AVR budget? Look for something with around 100 wpc (2 channels driven). More power means more expensive but if you can afford it more power is usually better. We can also help you choose good speaker wire at a good price if you haven't bought any yet. There is some stuff you want to stay away from. hey thanks for reply and salute to you for being in the army protecting our well being Quote Link to comment Share on other sites More sharing options...
biglion Posted September 2, 2017 Author Share Posted September 2, 2017 1 hour ago, wvu80 said: Hi @biglion welcome to the forums! I suggest an AVR for you. The 7.1 AVRs seem to be popular these days. Mainstream brands known to work well with Klipsch include Pioneer Elite, Yamaha Aventage, Denon, Marantz and Onkyo. Five hundred dollars can get you a nice sounding unit with lots of features. What is your AVR budget? Look for something with around 100 wpc (2 channels driven). More power means more expensive but if you can afford it more power is usually better. We can also help you choose good speaker wire at a good price if you haven't bought any yet. There is some stuff you want to stay away from. ok 500 dollars is good price i can work with also what it means when it says channels driven also whats recommend wire and what should i stay away from Quote Link to comment Share on other sites More sharing options...
biglion Posted September 2, 2017 Author Share Posted September 2, 2017 1 hour ago, teaman said: Hi biglion, welcome to the forum. Are you interested in a multichannel amp or a stereo amp? Not sure since you only posted the pair of Klipsch. We can help you better once you specify. Tim whats not sure what if need multichannel amp or a stereo amp i have the home surround system Quote Link to comment Share on other sites More sharing options...
biglion Posted September 2, 2017 Author Share Posted September 2, 2017 1 hour ago, Youthman said: Sadly...I didn't realize there was a difference. I've used both terms. I continue to learn something new every day. Welcome to the forums biglion. We can certainly help you spend your money. lol i dont have money like that lol lol i got a deal on the surround system Quote Link to comment Share on other sites More sharing options...
teaman Posted September 2, 2017 Share Posted September 2, 2017 Biglion, do you already have a receiver? Are the RP-260's the only speakers you have or do you have other speakers in addition to those? Are you planning on running only two channels or 5.1, 7.1 9.1 etc? Basically, do you have more than the two RP-260 speakers? If you have more, let us know! If you are only using the two speakers and have no interest in multi channel, home theater you only need a basic stereo receiver or amp/preamp combo. There is no use in investing in a Dolby Atmos/DTS encoded receiver or pre/pro if you are only going to use it with two speakers. Tim Quote Link to comment Share on other sites More sharing options...
biglion Posted September 2, 2017 Author Share Posted September 2, 2017 3 hours ago, teaman said: Biglion, do you already have a receiver? Are the RP-260's the only speakers you have or do you have other speakers in addition to those? Are you planning on running only two channels or 5.1, 7.1 9.1 etc? Basically, do you have more than the two RP-260 speakers? If you have more, let us know! If you are only using the two speakers and have no interest in multi channel, home theater you only need a basic stereo receiver or amp/preamp combo. There is no use in investing in a Dolby Atmos/DTS encoded receiver or pre/pro if you are only going to use it with two speakers. Tim no i dont have no receiver the one used had blowed it wasnt enough power this is the system i have http://www.klipsch.com/products/home-theater-systems-reference-premiere?model=rp-250 Quote Link to comment Share on other sites More sharing options...
teaman Posted September 2, 2017 Share Posted September 2, 2017 What is your budget for a receiver or pre/pro and amp? Quote Link to comment Share on other sites More sharing options...
biglion Posted September 2, 2017 Author Share Posted September 2, 2017 Just now, teaman said: What is your budget for a receiver or pre/pro and amp? around 500 600 Quote Link to comment Share on other sites More sharing options...
teaman Posted September 2, 2017 Share Posted September 2, 2017 Are you looking at Atmos? Installing in ceiling speakers and such? Have you checked into https://www.accessories4less.com/ ? They have a lot of clearance receivers and such at great prices. Just my two cents but why would you feel comfortable spending $3k on speakers and no more than $600 on a receiver or amp/pre/pro to power it? Quote Link to comment Share on other sites More sharing options...
biglion Posted September 3, 2017 Author Share Posted September 3, 2017 ok so what does 2 channels being driven only Quote Link to comment Share on other sites More sharing options...
willland Posted September 3, 2017 Share Posted September 3, 2017 11 hours ago, biglion said: ok so what does 2 channels being driven only Assuming you are speaking about AVRs, it usually means max sustained power before clipping(1% distortion) with 2 channels driven at 8ohms from 20Hz to 20kHz. Bill Quote Link to comment Share on other sites More sharing options...
wvu80 Posted September 3, 2017 Share Posted September 3, 2017 12 hours ago, biglion said: ok so what does 2 channels being driven only @willland ^^^ is correct. I added the warning about 2-channel because you will want to compare AVR power apples-to-apples. THE PROBLEM is these days manufacturers seem to mis-lead consumers by publishing power with ONE channel driven, which at first glance will make an AVR look more powerful then it really is. Nobody runs a multi-channel setup on ONE channel! Onkyo is not the only one who does this, but I am an Onkyo fanboy and it aggravates me they would do this. Check out the specs on this Onk AVR: https://www.amazon.com/Onkyo-TX-RZ810-7-2-Channel-Network-Receiver/dp/B01ETUV4I8/ref=sr_1_3?m=A2L77EE7U53NWQ&s=warehouse-deals&ie=UTF8&qid=1504442695&sr=8-3&keywords=onkyo+receiver This ad says this AVR puts out 200 watts per channel, a really high number for an AVR. But look closer, with 2 channels driven it is actually 130 wpc. Quote THX-Certified 130 W/Ch (8 Ohms, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven, FTC) and 200 W/Ch (6 Ohms, 1 kHz, 0.9% THD, 1 Channel Driven, FTC) from Custom RZ Grade Parts If you compared another AVR brand at the same price point which advertises with 2 channels driven against the Onk "1 Channel Driven" the Onk looks like it has more power. It doesn't. There are other numbers and technical terms we could discuss but just be aware to compare using the 2 channels driven spec. 1 Quote Link to comment Share on other sites More sharing options...
wvu80 Posted September 3, 2017 Share Posted September 3, 2017 19 hours ago, biglion said: also whats recommend wire and what should i stay away from Get OFC. Stay away from CCA. I use Monoprice speaker wire 12 awg. with banana plugs (do not use Monoprice plugs). Be sure to use Oxygen Free Copper (OFC) and NOT Copper Clad Aluminum (CCA). CCA is the cheap stuff. Unless it says OFC on the label, it is the cheaper CCA. Size 16 awg will be just fine. FYI I consider the 12 awg I use overkill, but that's why we're here, isn't it? This is from the Monoprice site which explains why you want OFC and not CCA. This speaker wire features two conductors made of high purity (greater than 99.95% pure), oxygen-free bare copper. Pure Bare Copper is a superior conductor to the copper clad aluminum (CCA) conductors used in most other inexpensive speaker wire. CCA is only about 68% as conductive as pure bare copper. This additional resistance is added to the impedance of your speakers and can negatively effect the sound. For the wire to have no audible effect, the total wire resistance should be no more than 5% of the lowest impedance of your speakers. Even speakers rated for a nominal 8-ohms, may dip to as low as 4-ohms at some frequencies, which further reduces the total cable resistance allowed in the wire. Using Pure Bare Copper speaker wire ensures that the total load put on the amplifier remains as close as possible to the impedance curve of your speakers. For example, a 16AWG 2-conductor Pure Bare Copper speaker wire has a total resistance of 0.803 ohms per 100 feet (both directions must be considered). By comparison, a 16AWG 2-conductor CCA speaker wire has a total resistance of 1.181 ohms per 100 feet. Assuming 4 ohms is the lowest impedance of your speakers, a speaker wire run can be no more 0.2-ohms total. 20 feet of 16AWG Pure Bare Copper would be 0.1606 ohms, well under the 0.2-ohm limit. On the other hand, 20 feet of 16AWG CCA would be 0.2362 ohms, well OVER the 0.2-ohm limit. https://www.monoprice.com/product?c_id=102&cp_id=10239&cs_id=1023902&p_id=2817&seq=1&format=2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.