Jump to content
The Klipsch Audio Community
Sign in to follow this  
gaggs

buzz

Recommended Posts

hello folks, new member here. have purchased my first pair of la scala speakers. have been using them for a couple of weeks now and they sounded terrific. the problem? this past week a change occurred.  have chord preamp and chord 200watt power amp. there is a loud buzzzing sound coming from the speakers now, even with the volume at zero. i was using xlr leads between the amps. tried another ss pre and amp with the same result.

in the end swopped over to a valve amp and.............. silence at last.

my question is why is there a buzzing when using ss amps?

hope some of you gurus can help

Share this post


Link to post
Share on other sites

Buzz, Welcome

 

I moved this into 2 Ch, more people will see it, it was originally posted in the,  Klipsch Museum: General Discussion thread.

Share this post


Link to post
Share on other sites

hi don,

 

yes, the valve amp uses rca leads. the chord has the ability to use unbalanced rca leads also. will try them and see what results i get.

another question is, i am using tellurium black speaker leads and am finding that the treble is extremely high. have downgraded to lower quality speaker leads and the sound balance is much better.

has anyone had any issues with using high quality speaker leads?

is the problem that the scala's are too sensitive to use high quality cables or do i need to look elsewhere for the origin of the "high sound"?

Share this post


Link to post
Share on other sites

When you tried a different SS amp and pre was it still with the same XLR cables?

Share this post


Link to post
Share on other sites

Oh and BTW most of us here use the smallest wire we can possibly find for speaker wire, that way the great majority of power from our power amps gets dissipated in the wire instead of the speaker:P

^This is a joke:). Welcome to the forum, Enjoy your Lascalas:emotion-21:

  • Like 2

Share this post


Link to post
Share on other sites

my how the brain works sometimes it frightens me! went through all the cables one at a time, nothing changed. almost crawling up the wall. as a last resort pulled out all the inputs then began with just the pre and the amp, so far so good. to cut a long story short. 

the culprit was the long cable i was using to connect the tv( optical to analogue amp) to the preamp. removed it found a good set of phono leads and plugged in aaaaaaaaaand silence no more buzzzzz

 

concluded that the long unshielded cable was picking up hum from the mains. have now reconnected the terulliam q black and now have ultimate definition and sound. so happy have ramped up the volume in ecstasy.

 

on another topic, what is the difference between the scala 1 and 11. are the 11 better? there is a lot of talk with ref to the crossovers, are 1 crossover better as some seem to prefer them to the new?

Share this post


Link to post
Share on other sites

The differences between the La Scala I and II are "cosmetic" and crossover.  The thicker walls of the bass horn reduce/eliminate a vibration in the sides at high volume that coloured the bass.  The restyle makes it pretty enough to replace the Belle. 

 

The drivers are virtually identical to the late '70s drivers, but the tweeter is now flush with the front of the cabinet.  The crossover is much more sophisticated than the late '70s/early '80s Type AA, with steeper slopes and a band-pass on the squawker.  However the sound of the Type AL-4 is not much different than my 1981 Type AAs.  The La Scala II *may* be using an AL-5 crossover, now, to match the K-horn. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...