Frzninvt Posted October 7, 2017 Share Posted October 7, 2017 Looks like a missed out on a couple of sets on ePay. I am going to attempt turn a standard Heresy into an HIP, I have the K-42's just wondering if the K-57 mids are able to run hotter like the K-55V's. Going to try sealed with polyfill at first then will add the slotted port and shelf. Quote Link to comment Share on other sites More sharing options...
jjptkd Posted October 8, 2017 Share Posted October 8, 2017 The k-57 runs about 3db hotter than the 55v, here's a link to a thread discussing this, one of your old threads actually: "This is the response that I got from Steve Phillips at Klipsch "Well, My suggestion would be no, you could not use the B-3 with the K-55-V. There spl differences between the 55-V and 57-K, 57 is about 2 to 3 dB higher I do not have specs on them, but the network differences are easy to notice. Not sure if you have the B-3, but I will send it along. Caps and tap points are different. You may be able to just change the tap points and the mid level be correct. I would suggest that it may not cause any problems using the network, just may not sound "right." Quote Link to comment Share on other sites More sharing options...
dirtmudd Posted October 8, 2017 Share Posted October 8, 2017 13 hours ago, Frzninvt said: Looks like a missed out on a couple of sets on ePay. I am going to attempt turn a standard Heresy into an HIP, I have the K-42's just wondering if the K-57 mids are able to run hotter like the K-55V's. Going to try sealed with polyfill at first then will add the slotted port and shelf. try finding a pair of aa networks.. factory specs call for a modified aa network Quote Link to comment Share on other sites More sharing options...
jjptkd Posted October 8, 2017 Share Posted October 8, 2017 I have a set rebuilt by Crites that I'm not using, not sure if I'm ready to let them go though.. I believe the HIE are the same as the AA with the exception of one capacitor. Quote Link to comment Share on other sites More sharing options...
Axz Hout Posted October 11, 2017 Share Posted October 11, 2017 On 10/8/2017 at 12:45 PM, jjptkd said: I believe the HIE are the same as the AA with the exception of one capacitor. Y 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.