Dave A Posted October 31, 2017 Share Posted October 31, 2017 Looks to be a variant of a Heresy but way more complicated crossover. What was the purpose of doing this and did it require different woofers and mids/tweets than the Heresy's? If this crossover does something special I would like to build a pair. The guy had just the two cabinets and one TH-SR-2 and one TH-SR-3 crossover and all the guts were gone so I am left guessing. It wont take much to upgrade the TH-SR-2 which was designed to work without a tweeter. Why would Klipsch elect to do that anyway? Kind of wondering if all the extra stuff on the crossover was for a K42 and not a K22 woofer. Quote Link to comment Share on other sites More sharing options...
JohnA Posted November 8, 2017 Share Posted November 8, 2017 Ooh, Interesting! It's hard to tell, but it looks like a 2nd order low pass, maybe with contouring on the woofer (like E2), a first order high and 2nd order low pass on the squawker, again, maybe with some contouring and a 3rd order high pass fed by a resistor, to further attenuate the tweeter. The tweeter circuit looks similar to a Type AA. Quote Link to comment Share on other sites More sharing options...
Frzninvt Posted November 9, 2017 Share Posted November 9, 2017 The network was designed for the speaker to perform in a large theater environment not for a K-42 woofer. Quote Link to comment Share on other sites More sharing options...
Dave A Posted November 11, 2017 Author Share Posted November 11, 2017 OK what would make it tuned for a large theater environment and what impact does that have on regular two channel stereo use? Quote Link to comment Share on other sites More sharing options...
Dave A Posted November 11, 2017 Author Share Posted November 11, 2017 On 11/8/2017 at 4:17 PM, JohnA said: Ooh, Interesting! It's hard to tell, but it looks like a 2nd order low pass, maybe with contouring on the woofer (like E2), a first order high and 2nd order low pass on the squawker, again, maybe with some contouring and a 3rd order high pass fed by a resistor, to further attenuate the tweeter. The tweeter circuit looks similar to a Type AA. Just think John, it could be all your's Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.