Shannon Posted November 16, 2017 Share Posted November 16, 2017 I am looking to install surround speakers to match my front and center reference series speakers. My living room has a raised ceiling, from 8' to 9'. There is an angled transition from the top of the 8' wall to the raised ceiling, directly facing the optimal listening area. This transition area is 16" OC but with only roughly 36" in height. Attic above, with vapor barrier on bottom of ceiling joists, and fiiberglass insulation between and above joists. It is very important to me to maintain both high R-Value and an intact vapor barrier. I initially though about enclosing the space in which I want to place the speakers, but with Klipsch's infinite baffle, that is not recommended. How can I install R-5800-W II's with an infinite baffle, while maintaining my vapor barrier and insulation? Quote Link to comment Share on other sites More sharing options...
Khornukopia Posted November 17, 2017 Share Posted November 17, 2017 The minimum "infinite baffle" space for in-wall speakers would typically be four inches deep, sixteen inches wide and ninety six inches tall, so if you built a back chamber of similar cubic volume and wrapped that with vapor barrier and insulation, the speakers should be right for you. Another thought on the subject is that if you cut a hole in the sheetrock wall and the vapor barrier, seal the edges, then install a wall mount speaker in that hole, the speaker itself is now the vapor barrier for that spot. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.