beckster Posted November 23, 2017 Share Posted November 23, 2017 This is a newbie question. How does one remove the crossover from the cabinet? I don't see any screws or the like. Does the mid range horn need to come out too? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Thaddeus Smith Posted November 23, 2017 Share Posted November 23, 2017 what vintage are they? The crossover boards are indeed screwed down, but they can be hard to see in the midst of all the parts (especially if there's a layer of dust) Quote Link to comment Share on other sites More sharing options...
thebes Posted November 23, 2017 Share Posted November 23, 2017 I find a good scrubbing with Quell works wonders. Quote Link to comment Share on other sites More sharing options...
Ol_mcdonald Posted November 26, 2017 Share Posted November 26, 2017 Sometimes they are "sunken" into the plywood just out of sight, having been overtightened. When you find them, use a #2 phillips bit and press down firmly and slightly turn the bit to ensure it is engaged in the screw head to prevent damage to it. Back it out slowly and don't allow the bit to slip inside the head causing damage. I've seen guys strip the head out so bad removing it requires some degree of skill. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.