James541 Posted January 26, 2021 Share Posted January 26, 2021 @Ri_ 's post was the solution to my issue as well. Thanks so much! Similar story: I bought the unit second-hand online, had it shipped. Connection must've come lose during shipping. With those directions it took about 5 minutes to fix. Use a very small flathead screwdriver to carefully pry the back panel off. I'm glad I had a small screwdriver set for repairing laptops and such. Quote Link to comment Share on other sites More sharing options...
Groto Posted February 17, 2021 Share Posted February 17, 2021 OMG I've had this issue for 3 YEARS. THANK YOU!!! Now all of the controls/LEDs/Bluetooth works!! OMG THANK YOU LOL Quote Link to comment Share on other sites More sharing options...
fracas Posted September 10, 2022 Share Posted September 10, 2022 Hi, all. I have the Three II and encountered this same issue. Seems that Klipsch must've learned from earlier mistakes and that wire the last few posts mentioned is now glued on each end to the connectors on the boards. So no issue here with wires disconnecting. I've checked the other connections and all the unglued ones also seem pretty secure. Nothing looks out of the ordinary. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.