andr3w1sh Posted January 21, 2018 Share Posted January 21, 2018 (edited) Hello Community, I have the sw-450 subwoofer and we just moved in to a new place so it's time to setup and recal everything, and I'm at a loss for the sub setup. My receiver has an auto-setup function with a listener mic, but how should I set the nobs on the sub? Should I be bypassing? Volume? I've seen a lot of mixed information, and I've even seen the "just experiment until it sounds good" suggestion. Can anyone give me a definitive answer? The rest of my setup is from the Icon series, so kf-28's in the front, ks-14's surround, kc-25 center channel. Pioneer Elite vsx-40 receiver. Thanks! Edited January 21, 2018 by andr3w1sh Quote Link to comment Share on other sites More sharing options...
wvu80 Posted January 21, 2018 Share Posted January 21, 2018 15 hours ago, andr3w1sh said: My receiver has an auto-setup function with a listener mic, but how should I set the nobs on the sub? Welcome to the Klipsch forum! Set the gain on the sub to about 50%, no more, and probably even closer to 25%. Set the crossover as high as it will go, probably 120 or 150. The AVR will set the actual crossover closer to 60 or 80 Hz. Set the phase to 0. Run the AVR setup program (like Audyssey) and you are good to go. Quote Link to comment Share on other sites More sharing options...
andr3w1sh Posted January 21, 2018 Author Share Posted January 21, 2018 30 minutes ago, wvu80 said: Welcome to the Klipsch forum! Set the gain on the sub to about 50%, no more, and probably even closer to 25%. Set the crossover as high as it will go, probably 120 or 150. The AVR will set the actual crossover closer to 60 or 80 Hz. Set the phase to 0. Run the AVR setup program (like Audyssey) and you are good to go. Thanks Dave! And thanks for the warm welcome! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.