codewritinfool Posted June 22, 2018 Author Share Posted June 22, 2018 On 6/22/2018 at 1:41 AM, drboar said: How about a socket in one part and a short rod sticking out from the other part? That would attach them in a similar way to that ball and socket corner thing. There is no ball and socket. I'm referring to the fact that the top is a truncated isosceles triangle with no orthogonal corners, while the corners are made for 90 degrees only. To make them fit the truncated triangle, material would have to be removed from the front corners and added to the back corners. Thinking about two solutions to this. @MookieStl proposed one workable solution and I came up with a different one. I'm trying to weigh the pros and cons now. 1 Quote Link to comment Share on other sites More sharing options...
MookieStl Posted June 23, 2018 Share Posted June 23, 2018 just for the record, I like my idea better! 1 Quote Link to comment Share on other sites More sharing options...
Hornographic Posted June 23, 2018 Share Posted June 23, 2018 1. I'd check around for a machinist/metal worker to see if someone could hack the ball corners for me. 2. Barring that, I'd make a "corner jig" out of a piece of wood stock, screw the ball down to that jig - skipping the one screw that'd be cut - and then run the whole assembly thru a bandsaw. You'd need a lot of those jigs, maybe, but they only need to be blocks big enough to hold the balls securely a couple of screws. 3. I don't know if I'd bother with trying to add material to the opened-up balls on the rear corners. If those are cut with two cuts -- one in line with with the "ears" -- they'd look like they were designed for the angle, I think. 4. Sorry bout the long-ended comment. It's hard to talk w/o a pencil. 5. I missed the alternatives you & Mookie talked about. Good luck, they're shaping up nicely. 1 Quote Link to comment Share on other sites More sharing options...
codewritinfool Posted July 7, 2018 Author Share Posted July 7, 2018 Well. I met @MookieStl today for the first time, and I'm here to tell those that don't know... he's a straight up good dude. He's helping me out with my HF corner problem, and I can't tell y'all how happy I am about it. You folks may not realize how cool this Klipsch community is, but this is a really special place. We didn't know each other at all, and in fact, I only talked to him on the phone maybe 2 minutes before I met him in person. We did some listening with one of his LSIs on one channel and one of my splits on the other channel. Sounded great. The best part is we couldn't tell the difference between the two channels. We had 'em maybe 20 feet apart and toed in a bit and tried all listening distances and they sounded consistently good. We wound our way through some SRV, Head East, Aristocrats, some Steven Wilson, a bit of Diana Krall, Joss Stone, and Norah Jones, and even some Moxy and Zebra, all the while talking about drivers and crossovers and KHorns and Belles and La Scalas and Heresys and a few other things, and didn't even have beers or even chairs. I can't wait to update you all on the Splits project, but without Mookie's help on this roadblock, I may not have ever updated you again. code 4 Quote Link to comment Share on other sites More sharing options...
MEH Synergy Posted July 7, 2018 Share Posted July 7, 2018 Your project doesn't go unnoticed. I am very impressed by the product thus far. Good luck and please do update as things come along/ the finished product. Strong work! 1 Quote Link to comment Share on other sites More sharing options...
MookieStl Posted July 7, 2018 Share Posted July 7, 2018 Just for the record, we did have beer and chairs, we just didn't use them! And I wasn't the only "good dude" in the room! You're 95% there, glad I could help you get past the last hurdle. You're splits are going to be very nice. Can't help but want to help a guy building splits that he plans to lend to friends for parties! You should mount a go pro on them and record the reaction on the faces of people hearing La Scalas for the first time. 2 1 Quote Link to comment Share on other sites More sharing options...
Marvel Posted July 8, 2018 Share Posted July 8, 2018 11 hours ago, MookieStl said: You should mount a go pro on them and record the reaction on the faces of people hearing La Scalas for the first time. Priceless! Quote Link to comment Share on other sites More sharing options...
MookieStl Posted July 8, 2018 Share Posted July 8, 2018 Separated a birth! Home stretch now! 6 Quote Link to comment Share on other sites More sharing options...
codewritinfool Posted August 17, 2018 Author Share Posted August 17, 2018 This project is back in business thanks to @MookieStl. He made 16 beautiful custom corners for me and I'll be putting them on to one of the HF sections this weekend. Can't wait to post photos. Quote Link to comment Share on other sites More sharing options...
Honeybadger Posted August 22, 2018 Share Posted August 22, 2018 Great project, I split a set a while back, turned out good as well. Clean work, nice job. 1 Quote Link to comment Share on other sites More sharing options...
OO1 Posted August 22, 2018 Share Posted August 22, 2018 - Quote Link to comment Share on other sites More sharing options...
codewritinfool Posted August 28, 2018 Author Share Posted August 28, 2018 Finally got a couple of corners on the front of the HF section. Thanks to @MookieStl for fabricating them for me! I am limited on time these days but hope to have more trim on soon and have better photos. Also, in the first photo you can see a bit of the other LF bin still needing to be puttied and sanded and painted... 2 Quote Link to comment Share on other sites More sharing options...
codewritinfool Posted September 2, 2018 Author Share Posted September 2, 2018 Started build of 2nd HF section. Waiting for glue to dry. Tomorrow will be 2nd sidewall and mounting the K-401 and K77 to the front. 1 Quote Link to comment Share on other sites More sharing options...
MookieStl Posted September 2, 2018 Share Posted September 2, 2018 Keep making progress! They will be a lot of fun once you get them complete and running. We already know they will sound good! 1 Quote Link to comment Share on other sites More sharing options...
codewritinfool Posted September 2, 2018 Author Share Posted September 2, 2018 2nd side glued up. Quote Link to comment Share on other sites More sharing options...
codewritinfool Posted September 3, 2018 Author Share Posted September 3, 2018 Today I got the K-401 and K-77 mounted to the front panel and got the front panel attached to the bottom & sides. The top is removable with screws. These are odd angles, but here are a few shots: Straight down inside from the back. Waiting for the front to bottom / sides glue to set, then the top comes off and I'll clean it all up a bit then start on the wiring & crossover mounting. There might be another update tonight, who knows. 2 Quote Link to comment Share on other sites More sharing options...
codewritinfool Posted September 4, 2018 Author Share Posted September 4, 2018 Drivers & crossover in and wired up on 2nd HF section. 1 Quote Link to comment Share on other sites More sharing options...
codewritinfool Posted September 5, 2018 Author Share Posted September 5, 2018 Painted the bottom with Duratex and put the feet on. BTW, that off-center screw is what holds the K-401 bracket on the other side. 2 1 Quote Link to comment Share on other sites More sharing options...
billybob Posted September 6, 2018 Share Posted September 6, 2018 Just wanted to say to your project, marvelously good show. Kudo 1 Quote Link to comment Share on other sites More sharing options...
codewritinfool Posted September 9, 2018 Author Share Posted September 9, 2018 Yesterday I made backs for the HF sections and attached them. The way the HF sections are made is that all sides are glued and brad nailed together except for the top, which is screwed on. Today I painted the new back sections, let them dry a bit then worked on putting the lower rear corners on the HF sections. We have family in town so I could only do a little bit. 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.