Jump to content

MCM 1900 time delays for active xover?


Blackrapids

Recommended Posts

Hi all. Just received a pristine 4 way MCM setup through the forum and am planning on moving to active crossovers. Are there calculations floating around for time delays? Asking as the DSP unit I'm looking at (Minidsp 4x10HD) has a maximum setting of 9ms for time correction. Will this be enough for the big old folded bass bins? If someone has travelled down this path and can share, I'd much appreciate it!

 

 

Link to comment
Share on other sites

I don't have the settings for those older models but I can say that 9Ms is probably going to be plenty.  I think you'll find in the 4-5 Ms range is all you need at most for those smaller horns.  If you have that little tweeter box that will take the most delay but you can also move it around physically to alter that.  The woofer is not delayed.  The upper horns are.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...