Blackrapids Posted April 23, 2018 Share Posted April 23, 2018 Hi all. Just received a pristine 4 way MCM setup through the forum and am planning on moving to active crossovers. Are there calculations floating around for time delays? Asking as the DSP unit I'm looking at (Minidsp 4x10HD) has a maximum setting of 9ms for time correction. Will this be enough for the big old folded bass bins? If someone has travelled down this path and can share, I'd much appreciate it! Quote Link to comment Share on other sites More sharing options...
Dave A Posted April 23, 2018 Share Posted April 23, 2018 Yes and while you answer his question I am asking the same thing about a three way. Quote Link to comment Share on other sites More sharing options...
mark1101 Posted April 24, 2018 Share Posted April 24, 2018 I don't have the settings for those older models but I can say that 9Ms is probably going to be plenty. I think you'll find in the 4-5 Ms range is all you need at most for those smaller horns. If you have that little tweeter box that will take the most delay but you can also move it around physically to alter that. The woofer is not delayed. The upper horns are. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.