Jump to content

.


MEH Synergy

Recommended Posts

Bought this to use short term until I got my new DAC. I bought a ps audio stellar gain cell dac to replace. Unit is in mint condition. Unit works perfectly and has no issues. Comes with original box and all original accessories. 

Analog volume control for RCA and XLR outputs
Separate volume control for the headphone Jacks
Digital audio connection to LightingTM jack-equipped Apple® devices (USB adapter required)
Updated headphone amp with increased gain
1/4" and 1/8" 24k gold plated headphone jacks
12V input and output triggers
Volume control lock out switch
Premium Analog Devices AD1853 24-bit/192 kHz Digital to Analog Converter IC
All inputs feature jitter reduction and are re-clocked and up-sampled to 422 kHz / 24 bit
USB input for playing music from PC or Mac (driver-less for easy setup)
Asynchronous sample rate conversion for all inputs including the USB input
Works with any format file on your computer up to 96 kHz / 24 bit
Optical and Coaxial digital inputs for use with any standard digital connection
RCA unbalanced and XLR balanced analog outputs
High current headphone output with volume control can drive any headphones from 32 to 600 ohms
Oversized internal toroid power transformer (not a wall wart like many competitors)
Will always power back up to the same input in the event of an AC power outage


Supports Incoming Digital Word Lengths:
16 bit - 24 bit Supports Incoming Digital Sampling Frequencies:
Opt & Coax: 8 kHz, 11.025 kHz, 16 kHz, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz.
USB: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz Upsampling Frequency:
422 kHz / 24 bit (all inputs) USB Streaming Controller:
Texas Instruments TAS1020B Sample Rate Converter:
Analog Devices AD1895 D to A Converter:
Analog Devices AD1853 Headphone Amplifier:
Texas Instruments TPA6120 Frequency Response:
20 Hz to 20 kHz ±0.2 dB Channel Balance:
< 0.05 dB, 20 Hz - 20 kHz Channel Separation:
> 95 dB, 20 Hz - 20 kHz Signal to Noise Ratio:
110 dB, A-weighted THD + Noise:
< 0.015 % Audio Output Level, RMS (maximum):
Unbalanced Variable: 2.4 V
Balanced Variable: 4.8 V
Unbalanced Fixed: 2.2 V
Balanced Fixed: 4.4 V Output Impedance:

Line out: 160 ohms, unbalanced or balanced
Headphone out: 10 ohms AC Power Requirement:
110-130 VAC 60 Hz or
220-240 VAC 50 Hz (voltage is selected on the chassis bottom)
Operating: 10 watts
Standby: < 1 watt Dimensions:
Width: 8.5" (220 mm)
Depth: 10" (254 mm)
Height: 2" (51 mm) with feet, 1.75" (45 mm) without feet Weight:
Net: 5 lbs (2.3kg)
Shipping: 8 lbs (3.7kg)

00G0G_f3KITEBe1Na_1200x900.jpg

00c0c_cWLT8dSr4bp_1200x900.jpg

00q0q_bs7gCtrQWZ3_1200x900.jpg

00E0E_2N6rz5Rfpa7_1200x900.jpg

00y0y_b6mg1bcbLfY_1200x900.jpg

00B0B_4oxDVyqdGIw_1200x900.jpg

00L0L_adSg6HTZYO8_1200x900.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...