marems Posted May 17, 2018 Share Posted May 17, 2018 Does anyone have a copy of the CF-2 xover schematic? I can’t find a copy anywhere Quote Link to comment Share on other sites More sharing options...
avguytx Posted May 17, 2018 Share Posted May 17, 2018 Are you just wanting to update parts like caps and resistors? Since those may have changed around "some" like the CF-3 and 4's, my recommendation would be to pull a crossover out and write down what parts are in them. Sometimes what's on a data sheet isn't what's actually in the cabinets. Most days it depended on what was "in the barn" and on the shelves. Quote Link to comment Share on other sites More sharing options...
Deang Posted May 17, 2018 Share Posted May 17, 2018 9 hours ago, avguytx said: Sometimes what's on a data sheet isn't what's actually in the cabinets. Most days it depended on what was "in the barn" and on the shelves. You have an example of this, because I’ve never run into one. Quote Link to comment Share on other sites More sharing options...
avguytx Posted May 18, 2018 Share Posted May 18, 2018 Maybe not so much on Klipsch but other brands I have. Plus electronics. Better safe than sorry. Quote Link to comment Share on other sites More sharing options...
marems Posted May 19, 2018 Author Share Posted May 19, 2018 Yes i just replaced the caps and resistors, I wanted a scematic because of the seperate .22uf cap I discovered on the underside of the board, just never saw anything done like that and was curious if any schematics showed it and to see if there are any different version schematics on line Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.