boricua2480 Posted July 20, 2018 Share Posted July 20, 2018 If I had the K-402/K-1133, 510/K-69A combo that included the xover for the full jubilee setup, would that network also work if I traded out the KHJ bass bins for MWM’s? Help me out! Thanks! Quote Link to comment Share on other sites More sharing options...
mark1101 Posted July 20, 2018 Share Posted July 20, 2018 What "included" crossover are you talking about? Quote Link to comment Share on other sites More sharing options...
boricua2480 Posted July 20, 2018 Author Share Posted July 20, 2018 2 minutes ago, mark1101 said: What "included" crossover are you talking about? Either the factory 3 way crossover or the Crites built crossover designed for the 3-way version of the Jubilee. Quote Link to comment Share on other sites More sharing options...
Md5150 Posted July 20, 2018 Share Posted July 20, 2018 MWM and jubilee bass bins are very different. It might "work" but it wouldn't sound as good as it should and might sound very bad. 1 Quote Link to comment Share on other sites More sharing options...
Coytee Posted July 20, 2018 Share Posted July 20, 2018 Is that the same passive that JC said was designed to go behind a screen, therefore would be a little "hot" on the top end?? Quote Link to comment Share on other sites More sharing options...
boricua2480 Posted July 20, 2018 Author Share Posted July 20, 2018 I’d imagine it’s the same passive unless it’s a Crites built one that is padded down a few db’s on the top end. I just wondered if the crossover settings are the same or close between the 2 configurations of Bass bins. If not the same or close then I’d have to go back to the original idea of an active network and sell the passive crossovers. Just trying to save money if possible but if it means saving money only to have a half assed setup then that’s not the direction I’d be going. Thanks again guys Quote Link to comment Share on other sites More sharing options...
ClaudeJ1 Posted July 20, 2018 Share Posted July 20, 2018 8 minutes ago, boricua2480 said: I’d imagine it’s the same passive unless it’s a Crites built one that is padded down a few db’s on the top end. I just wondered if the crossover settings are the same or close between the 2 configurations of Bass bins. If not the same or close then I’d have to go back to the original idea of an active network and sell the passive crossovers. Just trying to save money if possible but if it means saving money only to have a half assed setup then that’s not the direction I’d be going. Thanks again guys You could always use a cheap mini DSP on the bottom MWM if the passive didn't work. As long as the passive top end works, no reason to sell it. 2/3 of your speaker is fine, you only need to solve a bass bin problem IF there is one in your room. Quote Link to comment Share on other sites More sharing options...
diamonddelts Posted January 24, 2019 Share Posted January 24, 2019 On 7/20/2018 at 3:39 PM, boricua2480 said: Either the factory 3 way crossover or the Crites built crossover designed for the 3-way version of the Jubilee. Did Crites build a passive crossover for the three-way version of the Jubilees? I have not seen it listed on the website. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.