jayneisagirlsname Posted August 3, 2018 Share Posted August 3, 2018 Total noob here. Just bought this sub to complement my Vanatoo Transpanent Zero speakers. What frequency should I use? Quote Link to comment Share on other sites More sharing options...
RoboKlipsch Posted August 9, 2018 Share Posted August 9, 2018 125hz if using shelf mode 80hz in flat mode Gain is how loud you are setting the sub. It sends more or less signal to the sub overall i.e. if you cross at 100 everything under 100hz is raised or lowered with that gain knob. The crossover sets where the sub begins to cut off. If the bass is very thin in a spot or bloated but just in one area...you should raise or lower the crossover to get a smooth flat response. A mic measures this best but your ear can be sharp too. All the above assumes you are not using an avr. If you do, set the crossover on the sub to max and use the avr to set it as i mentioned above. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.