Popping when Changing AV source R10 Swi

[Fig217]

Hey all!! Just changed my AV receiver to an Integra DRX-5.  Get a popping sound from the sub when I change inputs on the receiver. 

 

Tried switching the sub settings but still pops. 

 

Connected to the LFE port 

 

Any clue on how to get rid of the popping?

 

Any help would be greatly appreciated!!!!! 

[Mallette]

Welcome aboard. Responses will come...

Dave

[The History Kid]

I have the DRX-3.1 and can not replicate the issue with my RSW-15.  There's typical timing issues that come up when a sources sound format changes, but that's pretty typical across the board.  The R-10SW may be catching noise from somewhere in the line too - which is the most probable cause.

[Fig217]

1 hour ago, Mallette said:

Welcome aboard. Responses will come...

Dave

Thanks!!

[Fig217]

1 hour ago, The History Kid said:

I have the DRX-3.1 and can not replicate the issue with my RSW-15.  There's typical timing issues that come up when a sources sound format changes, but that's pretty typical across the board.  The R-10SW may be catching noise from somewhere in the line too - which is the most probable cause.

Sorry to sound like a noob- what does that typically mean?

 

[The History Kid]

Sorry to sound like a noob- what does that typically mean?
 

Could be the cable itself, could be the sub, could be the amp. I'd start with trying a different cable to the sub. It's the cheapest place to start since they're generally only a couple dollars.