jpesaturo Posted August 16, 2018 Share Posted August 16, 2018 (edited) Hello, I have purchased a new construction home and trying to figure out speaker placement. I am looking at purchasing the PRO-180RPW for the Front Left & Right and the PRO-250RPW for the Center. Should I go with the PRO-250RPW for all 3? The other question is on the Center channel orientation. Looking at the specs for the 250 it will not fit horizontally between the studs. I could install vertically but then what does that do the heights of the TV in order to mount it that way? Edited August 16, 2018 by jpesaturo updated drawing Quote Link to comment Share on other sites More sharing options...
Liqiudcarney Posted February 21, 2019 Share Posted February 21, 2019 I essentially have the PRO-180RPW LCR setup (its actually the R5800's but the same design). I went that way for the same issue you are experiencing. Didn't want to cut a stud. Turns out I didn't measure properly and had to cut a stud anyway but no matter. As for how the 8 inch in wall speakers sound ......They sound very good. I am however coming from RF7ii's and an RC64ii so I can't say it sounds great. I'm not coming cause the floor space was needed and my choices were few. I'm happy with the Klipsch in wall design and wouldn't change it. I am thinking of adding another speaker to each front channel for more output as long as it doesn't mess with the stage. I also just changed my subs and will be changing my AVR soon so until that is all done and dialed in I will stay with the 3 R5800's up front. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.