ixsel8 Posted August 28, 2018 Share Posted August 28, 2018 Hello, Recently I bought R-112sw subwoofer to my klipsch the sixes system. Connected it to sub out output with LFE in sub. Setup frequency knob on sub to 80hz (as most recommend). So the question is with volume setup. I have GAIN knob in subwoofer and sub volume in klipsch the sixes (remote control buttons, range from 1 to 50). I found most recommend to setup first receiver sub volume to 0db (in my case receiver is the sixes system). Is the 25 mark in my sub volume setings equal 0db? And after setting it to 0db, I should setup GAIN knob in my sub to level up with my speakers. Is that the right way to do this? Maybe someone has this systems and could share their settings? thx in advance! Quote Link to comment Share on other sites More sharing options...
Hasty Posted August 29, 2018 Share Posted August 29, 2018 Personally, I'd start with gain on the sub at 50% and use the remote for the sixes to raise or lower the sub volume. That's probably going to allow you to use the sub volume to set the appropriate levels for what you're listening to. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.