brians7 Posted September 24, 2018 Share Posted September 24, 2018 I hope one of you guys have one that you could part with. I need one for a project. Thanks Brian Quote Link to comment Share on other sites More sharing options...
Frzninvt Posted September 24, 2018 Share Posted September 24, 2018 Looks like you are building a JBL B-460 cabinet. Very nice! Are you planning to use the BX-63a crossover network for it as well? The DBX 120X-DS or Audio Control Phase Coupled Activator (PCA) can also perform as crossover networks. I had dual B-380's for quite some time but opted for smaller cabinets with better low end response so I switched to Velodyne servo subs. Quote Link to comment Share on other sites More sharing options...
The Dude Posted September 24, 2018 Share Posted September 24, 2018 Is that an 18" woofer from JBL? If so I may have one that needs new surround. If I do and you are interested, i will make you a smoking deal on it. I will check when I get home tonight. Quote Link to comment Share on other sites More sharing options...
brians7 Posted September 24, 2018 Author Share Posted September 24, 2018 Can you send me a pict that would awesome. I will also take those contrac horns if you still have them. Thanks Brian Quote Link to comment Share on other sites More sharing options...
brians7 Posted September 24, 2018 Author Share Posted September 24, 2018 6 hours ago, The Dude said: Is that an 18" woofer from JBL? If so I may have one that needs new surround. If I do and you are interested, i will make you a smoking deal on it. I will check when I get home tonight. And yes it is Quote Link to comment Share on other sites More sharing options...
The Dude Posted September 25, 2018 Share Posted September 25, 2018 Can you send me a pict that would awesome. I will also take those contrac horns if you still have them. Thanks Brian let me know if these are the horns you speak of and if you want any better pictures. Keep in mind that the driver mounting flange is not perfect on the horns, but i was able to get a solid mount with the drivers. Sent from my SM-G955U using Tapatalk Quote Link to comment Share on other sites More sharing options...
The Dude Posted September 25, 2018 Share Posted September 25, 2018 i was thinking $75.00 plus shipping via PayPal friends and family. Sent from my SM-G955U using Tapatalk Quote Link to comment Share on other sites More sharing options...
brians7 Posted September 25, 2018 Author Share Posted September 25, 2018 32 minutes ago, The Dude said: i was thinking $75.00 plus shipping via PayPal friends and family. Sent from my SM-G955U using Tapatalk Fastlane Audios Drift recipe. These have the Conical horn. Can you measure the cone also the back of the cone should be covered with aquaplas. Quote Link to comment Share on other sites More sharing options...
The Dude Posted September 25, 2018 Share Posted September 25, 2018 17 minutes ago, brians7 said: Fastlane Audios Drift recipe. These have the Conical horn. Can you measure the cone also the back of the cone should be covered with aquaplas. Yes I do have those horns, that will be a set with the horns, compression drivers, 10" woofer and crossover for $350.00 plus shipping. The cabinets are free, but pick up only. You want edge to edge of the cone and how do I tell if they are covered in aquaplas? Quote Link to comment Share on other sites More sharing options...
brians7 Posted September 25, 2018 Author Share Posted September 25, 2018 8 minutes ago, The Dude said: Yes I do have those horns, that will be a set with the horns, compression drivers, 10" woofer and crossover for $350.00 plus shipping. The cabinets are free, but pick up only. You want edge to edge of the cone and how do I tell if they are covered in aquaplas? Yes edge to edge should be 15-1/2'' the aquaplas is a coating in the back of cone Quote Link to comment Share on other sites More sharing options...
The Dude Posted September 25, 2018 Share Posted September 25, 2018 yes its 15 1/2", i don't know if you can tell from the pic if it had that coating or not. to me it does appear to have a coating. Sent from my SM-G955U using Tapatalk Quote Link to comment Share on other sites More sharing options...
brians7 Posted September 29, 2018 Author Share Posted September 29, 2018 On 9/24/2018 at 10:28 PM, The Dude said: yes its 15 1/2", i don't know if you can tell from the pic if it had that coating or not. to me it does appear to have a coating. Sent from my SM-G955U using Tapatalk Thanks for you offer. I had one I bought off ebay but it turned out to be reconed with a 2240 cone it was not listed as such that is why I looking for one. I am going to recone it since I have no need for a 2240 just hated to do so as it looks new. Sorry to waste your time. 1 Quote Link to comment Share on other sites More sharing options...
Mikerodrig27 Posted March 26, 2021 Share Posted March 26, 2021 (edited) On 9/24/2018 at 11:28 PM, The Dude said: yes its 15 1/2", i don't know if you can tell from the pic if it had that coating or not. to me it does appear to have a coating. Sent from my SM-G955U using Tapatalk I know this is a really really old thread but I don't suspect you still have that 2245H sitting around. If you do, I would like to buy it. Thanks! Edited March 26, 2021 by Mikerodrig27 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.