Jump to content

Bi-Amped K-Horn + K-402 horns w/ KPT-415 woofers


Khornukopia

Recommended Posts

3 hours ago, carlthess40 said:

How well would the FH-1’s work with some JBL 2” horns ? Number 2446H . Lens model 2385 horn

The specs indicate that your horn and driver will do well to build a 2-way speaker combo on an FH-1. You will need a L-pad to trim the 2446H output down to 104db.

 

from the 2446H/J spec sheet;

  • 100 watts continuous program power handling when used above 500 Hz
  • 150 watts continuous program power handling when used above 1 kHz
  • 500 Hz to 20 kHz response
  • 8 ohm (H) or 16 ohm (J) impedance
  • 111 dB sensitivity (1W/1m on 2380A horn)
  • Coherent Wave™ phasing plug design for increased high-frequency output
  • 100 mm (4 in) pure titanium diaphragm with radial-rib topology
  • 100 mm (4 in) edgewound aluminum voice coil
  • Net weight: 13.8 kg (30.5 lb)
 
 
Link to comment
Share on other sites

The specs indicate that your horn and driver will do well to build a 2-way speaker combo on an FH-1. You will need a L-pad to trim the 2446H output down to 104db.
 

from the 2446H/J spec sheet;

  • 100 watts continuous program power handling when used above 500 Hz
  • 150 watts continuous program power handling when used above 1 kHz
  • 500 Hz to 20 kHz response
  • 8 ohm (H) or 16 ohm (J) impedance
  • 111 dB sensitivity (1W/1m on 2380A horn)
  • Coherent Wave[emoji769] phasing plug design for increased high-frequency output
  • 100 mm (4 in) pure titanium diaphragm with radial-rib topology
  • 100 mm (4 in) edgewound aluminum voice coil
  • Net weight: 13.8 kg (30.5 lb)
   

I’ve been looking for a pair of the FH-1 around central Florida and no luck so far
Where can I find a complete set of build plans for them? All the ones I find have been missing a lot of info
Link to comment
Share on other sites

4 hours ago, carlthess40 said:

I’ve been looking for a pair of the FH-1 around central Florida and no luck so far
Where can I find a complete set of build plans for them? All the ones I find have been missing a lot of info

 

I don't have cut sheets or plans for those cabinets but, maybe I can take some measurements of my existing boxes to fill in your missing dimensions. 

  • Like 1
Link to comment
Share on other sites

20 hours ago, carlthess40 said:

All the ones I find have been missing a lot of info

The plans on the tech-talk thread linked in the post above show what appear to be non-congruent numbers. That is because the dimensions of the cross-brace wings are overlayed on top of the dimensions of the main cabinet.

Link to comment
Share on other sites

If building a folded horn cabinet with per-veneered wood (La Scala style), you may need a table saw jig that will clamp the board up perpendicular to the table saw surface to make the rips with the blade tilted at 30 degrees to create the 60 degrees cut.

 

20220601_162215.jpg.4314f0208f000dab75423d3e55322fbe.jpg

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...