motodop 1 Posted October 19, 2018 I just bought some new R-41 -SA surrounds for my 5.1.4 and am a little confused about the angular build of them. With the wedge shape they must be placed flat against the rear wall or the side walls at the rear of the room. This means that the cone cannot be directed toward the back of your head or the sweet spot. They do not adhere to any of the Dolby specified placement guides. What would you do? Moto Quote Share this post Link to post Share on other sites
JefDC 18 Posted October 24, 2018 These are Dolby Atmos add-on speakers which can also be used as regular surround speakers - like you do. The angular tilt build into these speaker is meant to provide the correct angle to bounce the sound of the ceiling when the speakers are placed flat on top of another speaker. Quote Share this post Link to post Share on other sites
motodop 1 Posted October 24, 2018 Thanks JefDC. I guess i didn't explain my concern clearly. My concern is that , as in the Dolby recommendation for surround speaker placement below (with Arrow), You want to have the cone of the speaker facing the back of your head. With these wedge type surround they can only be placed 'flat' on the rear or side wall so getting the cone to direct toward the back of your head is difficult and no placement is perfect and we all want 'perfect'. My back wall is closer than the example below Quote Share this post Link to post Share on other sites
schwock5 5 Posted May 30 buy a speaker wall mount like monoprice has and you can then angle them. my RP500s only have a keyhole but i was still able to use that and angle the speakers towards the sweet spot. Quote Share this post Link to post Share on other sites
