John Duesenberry Posted November 18, 2018 Share Posted November 18, 2018 I just purchsed a brand-new pair of Heresy III's. The "Owner's Manual" says that "the riser can be removed for shelf or cabinet usage". I'd like to try that, but HOW DO I REMOVE THE RISER?? There are NO illustrations or diagrams that would indicate how to do this. The risers apear to be very firmly attached with some kind of metal studs. I don't want to just pry offthe risers by brute force; I might want to put them back some time. Can someone inform me how to do this, and/or send a link to some Klipsch documentation. These are great speakers, but for $2000 Klipsch should supply a better manual, noy just a few sheets in which they try to cover 5 products in 4 languages!.And the stick-on pads provided are cheap junk. IMHO. John D. Quote Link to comment Share on other sites More sharing options...
Budman Posted November 19, 2018 Share Posted November 19, 2018 welcome to the forum should be a phillips screwdriver Quote Link to comment Share on other sites More sharing options...
MEH Synergy Posted November 19, 2018 Share Posted November 19, 2018 Correct. Of course, there will be holes in the bottom after that and you should plug those up. Quote Link to comment Share on other sites More sharing options...
John Duesenberry Posted November 19, 2018 Author Share Posted November 19, 2018 Thanks for the advice. But the metal studs, or whatever you call 'em, on each corner can't be unscrewed by any Phillips or other screwdriver. Or do you mean that there are Phillips-head screws **under** these studs? Quote Link to comment Share on other sites More sharing options...
MEH Synergy Posted November 19, 2018 Share Posted November 19, 2018 They are not under the metal studs. They are separate. I owned them and took the risers off. Two minutes each side, done. Quote Link to comment Share on other sites More sharing options...
kink56 Posted November 22, 2018 Share Posted November 22, 2018 The screws are recessed in holes on the bottom side of the risers. The metal studs do not cover the screws. Leave the metal studs on the risers. Quote Link to comment Share on other sites More sharing options...
finallygotmyheresies Posted November 24, 2018 Share Posted November 24, 2018 On 11/18/2018 at 7:21 PM, John Duesenberry said: Thanks for the advice. But the metal studs, or whatever you call 'em, on each corner can't be unscrewed by any Phillips or other screwdriver. Or do you mean that there are Phillips-head screws **under** these studs? The metal stud you are referring to is a floor glide. Similar to this https://www.surplustrading.com/ace-metal-dome-floor-glides-4-per-pack-6-packs-per-box-51211-st505158020 As already mentioned, the riser is attached to the bottom of the speaker with phillips head screws. Quote Link to comment Share on other sites More sharing options...
mDash Posted November 26, 2018 Share Posted November 26, 2018 Might be easier with the pics showing where to work with. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.