Ciphoto Posted November 29, 2018 Share Posted November 29, 2018 I was going to update the firmware on my RSB 14 which I've only had a few months. So I downloaded the zip file, expanded it and put the two files on an empty 8GB flash drive from my mac. I followed the instructions of unplugging the unit, inserting the flash drive and holding the volume up button while plugging the power cord back in. But Dolby light never came on. I waited several minutes. So i released the volume up button and unplugged the unit, removed the flash drive. I confirmed i had the files on the drive, and I tried again. Still not dolby light. So i figured i would do it later after checking the forums and looking up some trouble shooting stuff. But now the unit will not work at all. I hook the power up the blue tooth and digital indicator light come on and stay on, but it is not giving any sound from my Apple TV, which i have hooked up via optical, i can not pair with my phone via blue tooth and it will not respond to it;s remote or the Universal remote i had programmed and had been using with it. 1 Quote Link to comment Share on other sites More sharing options...
mViper Posted May 12, 2020 Share Posted May 12, 2020 (edited) Hello, I have the same issue. Just the files were copied over on a Windows PC 😉 May I ask, if you got it working? Yes? --> How? Best Regards, Michael (-: --- After some more research - took another USB-Stick, copied the firmware update files on that one, tried it - it worked fine (-: Edited May 13, 2020 by mViper found solution Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.