chuha Posted January 20, 2019 Share Posted January 20, 2019 I have my mac connected to the USB in of a PowerGate. I can then select "Klipsch PowerGate" as one of my audio outputs, and that works just fine. Occasionally however, it is not available in the list. In an effort to track down this problem I noticed that when I plug the PowerGate into a USB3 hub which happens to have indicators showing active USB ports, the port does not light up, which for me indicates that the problem may be in the PowerGate. I can turn the device on and off, cycle through inputs; I even tried a factory reset at one point...no help. The simple solution appears to be plugging and plugging the PowerGate from AC/mains. Anything short of that has not helped. Anyone else have this problem or similar? Any suggestions? Quote Link to comment Share on other sites More sharing options...
cris Posted February 5, 2020 Share Posted February 5, 2020 Hi, I was having the same problem. My fix was to unplug the powergate from its power source for about 20 seconds with usb cable connected to your pc/mac. goodluck Quote Link to comment Share on other sites More sharing options...
LBCpapa256 Posted August 15, 2020 Share Posted August 15, 2020 I had a similar problem, I had to put a USB reclocker in between the amp and the computer, but then it seems to have fried both and made them inoperable. Quote Link to comment Share on other sites More sharing options...
Str8AWay Posted February 16, 2021 Share Posted February 16, 2021 I've had the exact same problem. Any one found a solution besides a powercycle yet? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.