Uncle Choppy Posted January 27, 2019 Share Posted January 27, 2019 In which year were Baltic Birch plywood cabinets discontinued in favor of MDF for the Cornwall line of speakers? Was Baltic Birch plywood ever used for the Chorus I cabinets? Best wishes. -UC Quote Link to comment Share on other sites More sharing options...
boom3 Posted January 29, 2019 Share Posted January 29, 2019 My Corns are 86s and they are MDF. Quote Link to comment Share on other sites More sharing options...
JRH Posted January 29, 2019 Share Posted January 29, 2019 To my knowledge, Cornwalls were never made using Baltic Birch, unless possibly as a specific special order. The birch used for decorator models was a custom void-free plywood made to Klipsch's spec. MDF did replace lumber core in the early 80's for models with "fine veneers". 1 Quote Link to comment Share on other sites More sharing options...
Uncle Choppy Posted February 10, 2019 Author Share Posted February 10, 2019 On 1/29/2019 at 11:25 AM, JRH said: To my knowledge, Cornwalls were never made using Baltic Birch, unless possibly as a specific special order. The birch used for decorator models was a custom void-free plywood made to Klipsch's spec. MDF did replace lumber core in the early 80's for models with "fine veneers". Okay. Thanks. Please allow me to modify my question: In which year were birch plywood cabinets discontinued in favor of MDF for the Cornwall line of speakers? Was birch plywood ever used for the Chorus I cabinets? Best wishes. -UC Quote Link to comment Share on other sites More sharing options...
JRH Posted February 11, 2019 Share Posted February 11, 2019 Birch plywood was only used for "decorator" models. It was not used in cabinets of any model with a "fine veneer", unless by some obscure deviation from standard. All products with fine veneers were changed from lumber-core to MDF in the early to mid-80's. I believe the Chorus started life using MDF. 1 Quote Link to comment Share on other sites More sharing options...
HDBRbuilder Posted April 6, 2019 Share Posted April 6, 2019 Due to these "materials-used" questions being asked so often, here is installment ONE of a tutorial on the what's and why's of panel types used over the years in Klipsch Speaker cabinets 1. FIne-veneered Lumber-core plywood: Veneered lumber-core plywood was a furniture industry staple for decades...with table-tops, and furniture cabinet panels often being made with it. The general rule of thumb was that these panels had more stability in temperature and humidity fluctuations than solid wood panels tended to have. And if you were planning to build something which needed to "blend-in" with "TRUE" fine furniture, use of veneered lumber-core was an economically-wise medium to go with. In the old days, the lumber-CORE was made out of numerous different types of wood, with the most common being birch....but as birch became used for more and more things, the move to poplar wood for the core came along. This move was due IN PART to the development of a hybrid poplar tree, which, when after being cut down, its stump would re-sprout with just ONE new tree-trunk...and it was a fast-growth hybrid...so it reached usable height and trunk diameter very quickly. which meant that replanting expenses were negligible, and planting-to-harvest times were shortened. So it was even cheaper to produce. The CORE of lumber-core plywood consists of equal-thickness narrow boards edge-glued together. On both sides of the core panel was laid one much thinner ply, with its wood grain cross-wise to the wood grain of the boards used in the CORE. Additionally a second ply was laid down atop of the first ply on both sides of the panel....this second ply was the fine veneer on one side, with the other side having a "non-fine" veneer laid down on it...both of these second pairs of plys had the wood grain running WITH the grain of the CORE boards. As good as it is, Lumber-core plywood has its own furniture-production issues, among which is warping and curling of the panels under high-temperature with high humidity conditions due to the lumber boards used in its core. So, when using the panels for MITERED speaker cabinets, some of the panels were just too warped/bowed/curled to be practical to use because getting perfect miters sawn on the ends of the panels, and/or getting the "toes" of the mitered edges TOGETHER during assembly was sometimes impossible, which cut into speaker-making profits due to labor-time wasted and/or scrapping of expensive panels. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.