TBird1961 Posted March 15, 2019 Share Posted March 15, 2019 (edited) I just took my new The Three out of the box and when I plug into a power source and connect my ipod with the aux cable I get nothing, no sound, and the source leds at the top of the speaker do not light up. The switch on the back is set to "line" and not "phono" Reading the manual to setup bluetooth also directs you to "select source" but I have no leds lighting up? Does this speaker need to have the battery charged before play? (its plugged into a power outlet) How long does charging take? I feel like I am missing something? The wifi led at the back panel does light up green, but that is the only indication that this speaker is receiving power. Edited March 16, 2019 by TBird1961 update info Quote Link to comment Share on other sites More sharing options...
rockhound Posted March 16, 2019 Share Posted March 16, 2019 Did you try the remote? Quote Link to comment Share on other sites More sharing options...
TBird1961 Posted March 16, 2019 Author Share Posted March 16, 2019 the speaker doesn't respond to the remote. Quote Link to comment Share on other sites More sharing options...
TBird1961 Posted March 16, 2019 Author Share Posted March 16, 2019 can you tell me, do the leds light up when power switch is flipped to "on" position? Quote Link to comment Share on other sites More sharing options...
rockhound Posted March 17, 2019 Share Posted March 17, 2019 Mine doesn’t only when Inswitch inputs. Quote Link to comment Share on other sites More sharing options...
Marvel Posted March 18, 2019 Share Posted March 18, 2019 Do you have any other source that you can provide to The Three? Bruce Quote Link to comment Share on other sites More sharing options...
Jeppah Posted April 2, 2019 Share Posted April 2, 2019 On 3/18/2019 at 1:51 PM, Marvel said: Do you have any other source that you can provide to The Three? Bruce I have an similar problem, my remote works but the switches on-top doesn't. None of them, no led either. Quote Link to comment Share on other sites More sharing options...
robfelara Posted April 3, 2019 Share Posted April 3, 2019 Hello, someone has some additional information about this problem. Thank you. Greetings. Quote Link to comment Share on other sites More sharing options...
CraigG Posted April 9, 2019 Share Posted April 9, 2019 On 3/15/2019 at 7:42 PM, TBird1961 said: I just took my new The Three out of the box and when I plug into a power source and connect my ipod with the aux cable I get nothing, no sound, and the source leds at the top of the speaker do not light up. The switch on the back is set to "line" and not "phono" Reading the manual to setup bluetooth also directs you to "select source" but I have no leds lighting up? Does this speaker need to have the battery charged before play? (its plugged into a power outlet) How long does charging take? I feel like I am missing something? The wifi led at the back panel does light up green, but that is the only indication that this speaker is receiving power. I'll point out that The Three does not have a battery to charge. I'd recommend making sure The Three is updated to the latest firmware. https://www.klipsch.com/firmware If you can configure WiFi on The Three, you can use the Klipsch app or the Play-Fi app under the About menu item to confirm that The Three has the latest firmware (currently MCU: 4.020). On my Three the WiFi light on top is always lit when the power switch is on, but I mainly use mine for Play-Fi and I have the wireless configured. I'll also mention that The Three is fairly smart about inputs (for better or worse), if there is no signal on a particular input, it may not allow you to select that input. So, if you don't have WiFi configured and it sees no signal on the other inputs, it's possible nothing would light up - but I believe it's always possible to select Bluetooth as an input, so you can configure it. I'd confirm that your aux cable is working for your iPod. I'd also make sure something is playing on your iPod and then try to turn the input selection knob. Quote Link to comment Share on other sites More sharing options...
Deang Posted April 19, 2019 Share Posted April 19, 2019 Yeesh. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.