hunkyn Posted March 23, 2019 Share Posted March 23, 2019 All I setup my 5.1.2 setup last night and I hear an echo in voice for all TV shows. Movies sound nice. Is there a setting I am missing? RP8060FA, RP504C, RP502S, RZ830 is my setup Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Ceptorman Posted March 23, 2019 Share Posted March 23, 2019 Is your volume still up on your TV? Sometimes the audio from the cable source is slightly behind in timing comparing the TV to the AVR. 1 Quote Link to comment Share on other sites More sharing options...
baron167 Posted March 23, 2019 Share Posted March 23, 2019 Is your volume still up on your TV? Sometimes the audio from the cable source is slightly behind in timing comparing the TV to the AVR. This [emoji3516][emoji3516][emoji3516]Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
hunkyn Posted March 23, 2019 Author Share Posted March 23, 2019 This is connected to the projector. I just checked and my projector does not have a speaker Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
baron167 Posted March 23, 2019 Share Posted March 23, 2019 What's your full setup and connections?Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
hunkyn Posted March 23, 2019 Author Share Posted March 23, 2019 5.1.2. RP-8060FA for front and heightsRP-504C centerRP-502S surrounds. RZ830 for AVR. Ran accueq and left it whatever it is set. Room is 17 x 12. Any other information you need from setup let me know and I can take screenshots from Onkyo setup if that helps. One thing I think may be wrong is I connected wire to the top of connectors for the front slope speakers. Should that be for bottom one? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Schu Posted March 23, 2019 Share Posted March 23, 2019 If your processing... timing/distance might be off in the avr/processor. Check that and do rudimentary physical measurements and massage the results audibly (If you don't have a way to measure/rew) Quote Link to comment Share on other sites More sharing options...
hunkyn Posted March 23, 2019 Author Share Posted March 23, 2019 Thanks everyone not sure what was the issue. I reset the whole thing including the projector (all are new by the way) and re-did the wiring and now the echo is gone. It was driving me mad all night. 1 Quote Link to comment Share on other sites More sharing options...
Ceptorman Posted March 23, 2019 Share Posted March 23, 2019 1 hour ago, hunkyn said: Thanks everyone not sure what was the issue. I reset the whole thing including the projector (all are new by the way) and re-did the wiring and now the echo is gone. It was driving me mad all night. Glad it worked out. Very nice system. Quote Link to comment Share on other sites More sharing options...
hunkyn Posted March 23, 2019 Author Share Posted March 23, 2019 Thank you. Coming from a Bose system and a 12 year old receiver I can see the duo and the type of sounds I missed all along. Can’t wait for rerun of all moviesSent from my iPhone using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.