babadono Posted April 3, 2019 Share Posted April 3, 2019 So nobody had some of GotHover's (Fastlane Audio) 1 to 2 inch adapters that they wanted to part with. And mine were glued and pin nailed together because Dave knew I was just going to go from the screw in K55 to his 2" Eliptrac horn. So now I want to be able to try other 1" drivers on a 2" horn (K510). So I hacksawed the backplate off to get access to the other mounting holes. First 2 pics are one adapter still intact. 3 and 4 are my hack job. 5 is side by side. More to come as I progress. Quote Link to comment Share on other sites More sharing options...
windashine Posted April 3, 2019 Share Posted April 3, 2019 …. o O (you have some fine hacksawing skill's...) Quote Link to comment Share on other sites More sharing options...
babadono Posted April 3, 2019 Author Share Posted April 3, 2019 Yea and sore arms Quote Link to comment Share on other sites More sharing options...
babadono Posted May 7, 2019 Author Share Posted May 7, 2019 Finally got these adapters sanded smooth enough to put back together. Attached K510 horns at 2" end Thanks @Emile. First up on the 1" end is the mighty B and C DE10 Mump-a -licious 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.