Seanskie Posted April 12, 2019 Share Posted April 12, 2019 Just bought this SW, according to the specs it is 300W, but I noticed on the metal plate on the back panel it says 240W. Thoughts? Quote Link to comment Share on other sites More sharing options...
willland Posted April 12, 2019 Share Posted April 12, 2019 @Seanskie, Welcome to the forum. I think the 240 watts you are referring to could be volts not watts. The R-10SW is spec'd at 150w RMS and 300w peak. Bill Quote Link to comment Share on other sites More sharing options...
Edward K. Paul Posted April 14, 2019 Share Posted April 14, 2019 Same issue here. Not an expert but have had many subs and this one sounds awful. It's a R-10SWi NA. Under this is reads - Power 240W. First problem, "NA" doesn't seem to exist. Last, unless Klipsch is THAT different, as an electrician the W after 240 means watts. Something isn't right here. Thank you. Quote Link to comment Share on other sites More sharing options...
glens Posted April 14, 2019 Share Posted April 14, 2019 Maybe North America (i.e. 120V mains)? Quote Link to comment Share on other sites More sharing options...
Edward K. Paul Posted April 15, 2019 Share Posted April 15, 2019 Bought it in the Chicago suburbs. Maybe I received a special edition with dual VCs!!!😁. Thank you for responding. Quote Link to comment Share on other sites More sharing options...
HenrikTJ Posted April 16, 2019 Share Posted April 16, 2019 (edited) Hi there Your sub is a 150W/300W sub. The 240W on the back panel is just the subs power consumption, not the amplifiers output. Edited April 16, 2019 by HenrikTJ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.