sootshe Posted April 20, 2019 Share Posted April 20, 2019 Hi all, I have a set of 5.3ft3 cabinets with 2 x 4" diam x 6" long ports that I want to install some CW1526C's into. I ran sims in Win ISD & that size cab seems to work OK, but I can't seem to get the venting calculation to work properly. TS parameters for the 1526 attached. Can anyone run some sims for me & tell me what the best port dimensions are for the 1526 drivers in that size cab? I would like the tuning frequency to be as close to the tuning of the Cornwall cabinets as possible.....not sure what that tuning frequency is. Thanks. CW1526C WOOFER DRIVER PARAMETERS.docx Quote Link to comment Share on other sites More sharing options...
sootshe Posted April 21, 2019 Author Share Posted April 21, 2019 Sorry....forgot to add the TS parameters.....see attached in post 1. Quote Link to comment Share on other sites More sharing options...
karlson3 Posted April 29, 2019 Share Posted April 29, 2019 Looks real good Quote Link to comment Share on other sites More sharing options...
glens Posted April 29, 2019 Share Posted April 29, 2019 With what for ports? Quote Link to comment Share on other sites More sharing options...
karlson3 Posted April 29, 2019 Share Posted April 29, 2019 if addressed to me (?) , then the OP's 2x 4"ID by 6" long ports were used in the sim Quote Link to comment Share on other sites More sharing options...
glens Posted April 30, 2019 Share Posted April 30, 2019 Yes, and thank you. Quote Link to comment Share on other sites More sharing options...
sootshe Posted May 29, 2019 Author Share Posted May 29, 2019 On 4/29/2019 at 7:30 PM, karlson3 said: Looks real good Been a bit tied up on other projects lately, but thanks for your help....I appreciate it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.