wnabphil78@gmail Posted June 2, 2019 Share Posted June 2, 2019 Hey all, So now my KLf 20s are all done I need a sub that can pair with them. Should I go with a powerful 12' or 15". Want to make sure the 12' s enough to keep up with the 20s whiach are LOUD! Thanks Tom 1 Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted June 2, 2019 Share Posted June 2, 2019 If you want to go with Klipsch I'd suggest two R-115SWs. Otherwise SVS has some great options. 2 Quote Link to comment Share on other sites More sharing options...
Emile Posted June 2, 2019 Share Posted June 2, 2019 I went the "cheap" route ... DIY 15" kit from PartsExpress. Bit of work but the sound is VERY good. Check them out 2 Quote Link to comment Share on other sites More sharing options...
wnabphil78@gmail Posted June 4, 2019 Author Share Posted June 4, 2019 I ended up getting a paradigm servo 15 v1, just missing the external control for the phase, will post to see if anyone has one for sale, Thanks Tom Quote Link to comment Share on other sites More sharing options...
willland Posted June 4, 2019 Share Posted June 4, 2019 4 hours ago, wnabphil78@gmail said: I ended up getting a paradigm servo 15 v1, just missing the external control for the phase, will post to see if anyone has one for sale, Thanks Tom Great sub, I owned twins a few years back. Bill Quote Link to comment Share on other sites More sharing options...
wnabphil78@gmail Posted June 4, 2019 Author Share Posted June 4, 2019 1 hour ago, willland said: Great sub, I owned twins a few years back. Bill Hi Bill, Maybe you can help me. I have a Yamaha AS701 integrated amp and I am just using my sub out to the sub in with a cable. I don't have the X30. My question is this ok to do? It sounds decent but cant control the phase or the Xover but my amp is set up for 80 hz on the sub out. Thanks for your help, Tom Quote Link to comment Share on other sites More sharing options...
willland Posted June 4, 2019 Share Posted June 4, 2019 1 hour ago, wnabphil78@gmail said: Hi Bill, Maybe you can help me. I have a Yamaha AS701 integrated amp and I am just using my sub out to the sub in with a cable. I don't have the X30. My question is this ok to do? It sounds decent but cant control the phase or the Xover but my amp is set up for 80 hz on the sub out. Thanks for your help, Tom You can but no bass management at all. Full signal from sub preout unless I am missing something. Maybe do a little more research to see if the Yamaha has a built in low pass filter, which I doubt. I would not worry too much about the phase unless the sub is in a location that is not on the same plane/distance as your mains. Some of the members on this forum have used another item for their DIY sub projects so maybe one of them will chime in. Bill 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.