Rudy81 Posted June 2, 2019 Share Posted June 2, 2019 I have 4 full, brand new, bags of UltraTouch Denim insulation available. Smallest amount you can purchase commercially is a full pallet and I should have 4 bags left after my upcoming project. I use this insulation for acoustic absorbers and sound deadening. Here are the details on the product I have available. Price is $150 per bag. Bags are large and cannot be shipped. 2 bags will fill the bed of an F-150. UltraTouch Denim Insulation Details: R-13 Product Code 10002-01324 Thickness: 3.5" 24.25" wide 94" length, per piece 8 pieces per bag 126.63 sq. ft. coverage per bag. UltraTouch-Denim-Spec-Sheet.pdf 1 Quote Link to comment Share on other sites More sharing options...
J M O N Posted June 7, 2019 Share Posted June 7, 2019 I am interested. Will need to figure out how much I would need but should be able to use at least one bag. 1 Quote Link to comment Share on other sites More sharing options...
Rudy81 Posted June 7, 2019 Author Share Posted June 7, 2019 Great! Just PM when ready. Quote Link to comment Share on other sites More sharing options...
Thaddeus Smith Posted June 7, 2019 Share Posted June 7, 2019 Would love to help you offload, but I just don't have a use for it at the moment. I'll ask around my network to see if anyone else might. Quote Link to comment Share on other sites More sharing options...
Rudy81 Posted June 7, 2019 Author Share Posted June 7, 2019 7 minutes ago, Thaddeus Smith said: Would love to help you offload, but I just don't have a use for it at the moment. I'll ask around my network to see if anyone else might. Thank you sir. Since you have a network, let folks know I also have RSW-15 drivers, passive radiators and cabinets. Time to make room in my small shop. Quote Link to comment Share on other sites More sharing options...
Thaddeus Smith Posted June 7, 2019 Share Posted June 7, 2019 1 minute ago, Rudy81 said: let folks know I also have RSW-15 drivers, passive radiators and cabinets. Time to make room in my small shop. Oh I'm out of the loop I guess. I remember you trying to sell those at one time, but thought you had decided to keep them integrated with the mains? So basically everything but the active plate amps, yes? Quote Link to comment Share on other sites More sharing options...
Rudy81 Posted June 7, 2019 Author Share Posted June 7, 2019 (edited) I originally decided to keep them and had been using them with my mains....good memory. I recently finished three new 'huge' LF cabinets that go down to 20hz with no problem. So, I no longer need the RSW's. They do not have the amps, control panels or the grill's. Basically just the drivers, passive radiators and cabs. I'm currently working on polycylindrical diffuer/absorbers and am tripping on the RSWs in my shop. I should have built a bigger shop long ago. Edited June 7, 2019 by Rudy81 LF cabs pic Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.