Tizman Posted June 11, 2019 Share Posted June 11, 2019 Hello All. I've been searching, without any success, for a crossover schematic for my Tangent 30 speakers, and am hoping that someone has one handy. The crossovers in my pair of Tangent 30 appear to have been modified, as the capacitors don't match from one to the other. Any help with this would be much appreciated, as I don't think there is a schematic available for any of the Tangents other than those that use the drivers and crossovers of the Heresy (Tangent 400, 4000). Thanks in advance! Cheers, Tiz Quote Link to comment Share on other sites More sharing options...
moray james Posted June 12, 2019 Share Posted June 12, 2019 I did a pile of searching with no luck and decided to ask Bob Crites who had the schematic on file. This is just one small reason whey Bob Crites deserves the support of all of us here at the Klipsch forum. Thank you Bob Note the T30 schematic is very similar to the KG4 schematic. Tangent 30, from the Classic section of the web site: FREQUENCY RESPONSE: 50Hz-20kHz±3dB SENSITIVITY: 96dB @ 1watt/1meter POWER HANDLING: 125 watts maximum continuous (625 watts peak) NOMINAL IMPEDANCE: 8 ohms ENCLOSURE TYPE: Sealed DRIVE COMPONENTS: Two-way system using one 1" (2.54cm) phenolic diaphragm compression driver tweeter with a 90°x40° Exponential horn and two 8" (20.32cm) fiber-composite cone woofers TWEETER: K-80-K 1" (2.54cm) Phenolic diaphragm compression driver HIGH FREQUENCY HORN: 90°x40° Exponential Horn HIGH FREQUENCY CROSSOVER: 1800Hz WOOFER: Two K-6-K 8" (20.32cm) Fiber-composite cones DIMENSIONS: 27.25" (69.2cm) x 14.2" (36.1cm) x 12.25" (31.1cm) WEIGHT: 45 lbs. (20.4kg) ENCLOSURE MATERIAL: Medium density fiberboard construction (MDF) FINISHES: Walnut YEARS BUILT: 1989 - 1991 Best Regards Moray James Klipsch Tangent 30/40 Schematic. Quote Link to comment Share on other sites More sharing options...
Tizman Posted June 14, 2019 Author Share Posted June 14, 2019 Thanks for the Tangent 30 crossover schematic Moray, and thanks to Bob Crites as well. I am pretty sure that this schematic does not exist anywhere else on the web, as I have done a lot of searching as well. Much appreciated! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.