Tangent 30 crossover schematic

[Tizman]

Hello All.

 

I've been searching, without any success, for a crossover schematic for my Tangent 30 speakers, and am hoping that someone has one handy.  The crossovers in my pair of Tangent 30 appear to have been modified, as the capacitors don't match from one to the other.  Any help with this would be much appreciated, as I don't think there is a schematic available for any of the Tangents other than those that use the drivers and crossovers of the Heresy (Tangent 400, 4000).  Thanks in advance!

 

Cheers,

Tiz

[moray james]

I did a pile of searching with no luck and decided to ask Bob Crites who had the schematic on file. This is just one small reason whey Bob Crites deserves the support of all of us here at the Klipsch forum. Thank you Bob

Note the T30 schematic is very similar to the KG4 schematic.

 

Tangent 30, from the Classic section of the web site:

FREQUENCY RESPONSE: 50Hz-20kHz±3dB

SENSITIVITY: 96dB @ 1watt/1meter

POWER HANDLING: 125 watts maximum continuous (625 watts peak)

NOMINAL IMPEDANCE: 8 ohms

ENCLOSURE TYPE: Sealed

DRIVE COMPONENTS: Two-way system using one 1" (2.54cm) phenolic diaphragm compression driver tweeter with a 90°x40° Exponential horn and two 8" (20.32cm) fiber-composite cone woofers

TWEETER: K-80-K 1" (2.54cm) Phenolic diaphragm compression driver

HIGH FREQUENCY HORN: 90°x40° Exponential Horn

HIGH FREQUENCY CROSSOVER: 1800Hz

WOOFER: Two K-6-K 8" (20.32cm) Fiber-composite cones

DIMENSIONS: 27.25" (69.2cm) x 14.2" (36.1cm) x 12.25" (31.1cm)

WEIGHT: 45 lbs. (20.4kg)

ENCLOSURE MATERIAL: Medium density fiberboard construction (MDF)

FINISHES: Walnut

YEARS BUILT: 1989 - 1991

 

Best Regards Moray James

 

•  

 

Klipsch Tangent 30/40 Schematic.

 

 

[Tizman]

Thanks for the Tangent 30 crossover schematic Moray, and  thanks to Bob Crites as well.  I am pretty sure that this schematic does not exist anywhere else on the web, as I have done a lot of searching as well.  Much appreciated!