Jump to content
The Klipsch Audio Community
Sign in to follow this  
Tizman

Tangent 30 crossover schematic

Recommended Posts

Hello All.

 

I've been searching, without any success, for a crossover schematic for my Tangent 30 speakers, and am hoping that someone has one handy.  The crossovers in my pair of Tangent 30 appear to have been modified, as the capacitors don't match from one to the other.  Any help with this would be much appreciated, as I don't think there is a schematic available for any of the Tangents other than those that use the drivers and crossovers of the Heresy (Tangent 400, 4000).  Thanks in advance!

 

Cheers,

Tiz

Share this post


Link to post
Share on other sites

I did a pile of searching with no luck and decided to ask Bob Crites who had the schematic on file. This is just one small reason whey Bob Crites deserves the support of all of us here at the Klipsch forum. Thank you Bob

Note the T30 schematic is very similar to the KG4 schematic.

 

Tangent 30, from the Classic section of the web site:

FREQUENCY RESPONSE: 50Hz-20kHz±3dB

SENSITIVITY: 96dB @ 1watt/1meter

POWER HANDLING: 125 watts maximum continuous (625 watts peak)

NOMINAL IMPEDANCE: 8 ohms

ENCLOSURE TYPE: Sealed

DRIVE COMPONENTS: Two-way system using one 1" (2.54cm) phenolic diaphragm compression driver tweeter with a 90°x40° Exponential horn and two 8" (20.32cm) fiber-composite cone woofers

TWEETER: K-80-K 1" (2.54cm) Phenolic diaphragm compression driver

HIGH FREQUENCY HORN: 90°x40° Exponential Horn

HIGH FREQUENCY CROSSOVER: 1800Hz

WOOFER: Two K-6-K 8" (20.32cm) Fiber-composite cones

DIMENSIONS: 27.25" (69.2cm) x 14.2" (36.1cm) x 12.25" (31.1cm)

WEIGHT: 45 lbs. (20.4kg)

ENCLOSURE MATERIAL: Medium density fiberboard construction (MDF)

FINISHES: Walnut

YEARS BUILT: 1989 - 1991
 
Best Regards Moray James
 
  •  

 

Klipsch Tangent 30/40 Schematic.

 

Klipsch Tangent 30.jpg

 

Share this post


Link to post
Share on other sites

Thanks for the Tangent 30 crossover schematic Moray, and  thanks to Bob Crites as well.  I am pretty sure that this schematic does not exist anywhere else on the web, as I have done a lot of searching as well.  Much appreciated!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...